Kenmore Air Purifiers - Page 3 - Recent Questions, Troubleshooting & Support
Kenmore AC2044-1 question ASAP!
If it says "Clean Cell Now" and it is a new machine, it is broken. I have six, yes six, of this model. They are all new and you shouldn't have to clean the filter/cells for a few months.
The way to clean is:
- Unplug
- remove the white cover
- remove the prefilter. Good time to clean the prefilter by removing the 2 retention clips and gently swing the prefilter outward. Clean or groom it with a vacuum. Use the upholstery brush. wash the prefilter in warm, soapy water. No Chlorine! Rinse clean with regular water. Wipe with a paper towel and let dry completely. It is okay to gently use a hair blower to speed up the drying process.
- Onto the Cell.
- The cell can be washed one of two ways. Either in a hot tub of water or in a dishwasher.
- Wear gloves to protect your hands. Never touch the fins or wires. It will ruin them and cut you up. Use the two handles.
- Use hot water and dish detergent.
- No chlorine and no abrasives.
- Soak for 10 minutes, then dip a couple of times to remove stuck dust/dirt/schmutz.
- Rinse with clean water.
- Allow to dry
- Allow to dry
- Allow to dry
- Okay to use a hair dryer to speed up process.
- Reinstall
- Power up
- Press and hold CHECK button for 3 secs to reset.
Thanks.
Press power, buttons light up and thats it
Try pressing the clean cell now button & check pre filter button at the same time hold buttons down at the same time for about 5 seconds with the air cleaner turned of and blue screen lit
Not finding what you are looking for?