Kelvinator Dishwashers - Recent Questions, Troubleshooting & Support

That is either not the whole model number or it is not correct. There maybe a float switch in the machine that is sensing a high water level and is shutting the machine down. It is impossible to tell without the right model number.

Kelvinator... | Answered on Apr 27, 2020

If the drain pump is running but not draining the unit, the hose may be clogged. If it drains for rinsing but not after the wash cycle, the problem would seem to be the control board. Probably just replace.

Kelvinator... | Answered on Feb 20, 2020

Most all dishwashers have what looks like a air hockey striker. This is the float. It should move freely up and down. Not to much travel.
Next would check for a faulty water inlet valve.
These in my opinion would be the two most likely culprits.
I hope this information will help you! Have a blessed day!

Kelvinator... | Answered on Nov 15, 2019

Unplug the power cord to your dishwasher. You can do this by manually removing the dishwasher from the wall and unplugging it, or you can flip the power switch to your kitchen at the circuit breaker (although you will need light to drain the dishwasher hose).

2 Put on your gloves,and, using your screwdriver, unscrew the screws from the kick plate of your dishwasher. The kick plate is the panel just below the door of your dishwasher.

3 Place your bucket on the floor in front of the dishwasher.

4 Unhook the drain hose by pinching the ends of the clamp and sliding it down the hose. Remove the other end from the pump. There will be two hoses in your dishwasher. The drain hose is the one that leads from the pump to the underneath of your kitchen sink.

5 Point the hose into your bucket to drain any debris. Twist and scrunch the hose to help remove the waste.

6 Test the hose by running water through it,and then reattach your hose in the same manner in which you detached it from your dishwasher.

Kelvinator... | Answered on Jul 22, 2019

Is there any fuses on a kelvinator dishwasher kd12ww1

Kelvinator... | Answered on Apr 20, 2019

moved you out of computers to DISHWASHERS
RTM , read the manual first? google for it and read, please.

Kelvinator... | Answered on Apr 15, 2019

Could be cycle timer failure

Kelvinator... | Answered on Feb 14, 2019

Fixya does not sell Kelvinator timers.

Kelvinator... | Answered on Oct 15, 2018

We don’t sell parts. You can look it up on or

Kelvinator... | Answered on Oct 15, 2018

good day
my dishwasher give e3 and e4. what is the problem and how can we solve the problem.

Kelvinator... | Answered on Aug 24, 2018

The heating element or control may have failed.

Kelvinator... | Answered on Apr 07, 2018

Not finding what you are looking for?
Kelvinator Logo

141 questions posted

Ask a Question

Usually answered in minutes!

Top Kelvinator Dishwashers Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

Brad Brown

Level 3 Expert

18402 Answers


Level 3 Expert

1708 Answers

Are you a Kelvinator Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides