JVC Audio Players & Recorders - Page 7 - Recent Questions, Troubleshooting & Support
JVC Subwoofer problem.
You may have a break in the wire. You can find out by slowing moving your fingers down the wire until you notice sound coming from the subwoofer. You can fix it yourself by cutting about an inch away from the break both ways. Then cuttings some of the wire off, so the copperwire is exposed. then wrap the two copperwire ends together and seal it with elections tape. or Try replacing the 60 watt subwoofer wire.
JVC SP-PWA-235 has one input
The 3 RCA type connectors (red, white,black) are all pre-amp outputs, not inputs. (Cut the girl some slack) the black is for the subwoofer. The red and white are pre-amp outputs for either up converting from a 5.1 to a 7.1 system, or for running a X.2 (2 subwoofers L &R). If you are running 2 subs, be sure on one of them to reverse the polarity.
Connecting Powered Subwoofer to a Receiver
you will need a line-level converter to use this subwoofer- it is a rectangular-shaped box with wires coming out on one end and red-and-white RCA plugs one the other. The end with the wires coming out will hook to the receiver, and the other end will need to plug into the sub.
1/4/2019 7:53:26 AM •
JVC Audio...
•
Answered
on Jan 04, 2019
Not finding what you are looking for?