Jensen Televison & Video - Recent Questions, Troubleshooting & Support


Contact Jenson direct. They are a great company. There is nothing online

Jensenmobile Mobile Audio, Multimedia, Receivers, Speakers ...

jensenmobile.com
Mobile audio performance upgrades for cars and trucks. Multimedia, Receivers ... Multimedia - Jensen Electronics ... Amplifier. Speakers - Jensen Electronics ... ‎Product Categories · ‎Support · ‎Contact Us · ‎Multimedia

ASA - Jensen

www.jensen-electronics.com
JENSEN Heavy Duty develops stereos, speakers, amplifiers, and sound systems ... Component video input x 1 (YPbPr); Stereo audio input x 1; HDMI input x 2 ...

Jensen Televison... • Answered on Mar 26, 2021


Probably not required unless an older home or low slope roof, but very easy and not expensive to do when re-roofing. When attics were poorly insulated snow would melt above the attic from heat lost from the house, then refreeze at the eave causing an ice dam. More melting water hits the ice dam then back up under roof shingles and felt paper. It is not required, but your specific conditions could warranty it. If your roofer is recommending it I would do it.

Jensen JER-422... • Answered on Jan 29, 2021


there should be a minimum of 50mm verge overhang on the gables,more if the roof is open to exposure, and the same 50mm into the gutter

Jensen JER-422... • Answered on Jan 29, 2021


If you are ever in Melbourne I 100% can set it to region 4

Regards


Steven

Ph 0428567212

Jensen Televison... • Answered on Dec 19, 2020


Applicable code(s) would be found in a compatible remote control.

Jensen Televison... • Answered on Nov 19, 2020


Buen d?a deseo el c?digo de mi control Topsonic RM-L1185 para televisor Sony, por favor

Jensen Televison... • Answered on Nov 16, 2020


It could be caused by sound settings so change it to audio out. Also check with both remotes if the sound is low.

Jensen Televison... • Answered on Sep 19, 2020


  1. Power and switch on the Durabrand DVD player.
  2. Open the DVD disc tray tray or lid.
  3. Press Stop.
  4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
  5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control.
  6. Press OK.
  7. Close the disc tray and press Standby on the DVD player front
The above unlock DVD player region code trick should works on models including Durabrand DVD-1000, Durabrand DVD-1005, Durabrand DVM1418c, Durabrand LCDTV *** DVD player model PVS 21175S1 and others DVD players from Durabrand.

If the above unlock region code hack doesn’t work, or if you’re using Durabrand Car DVD Player model PVS1966, Durabrand PVS1960, Durabrand PVS1680, Durabrand PVS1970, Durabrand PVS223, Durabrand STS75E, Durabrand Dual-7B or Durabrand Dual-7BL, try the following unlock code instead.
  1. Power on the DVD player.
  2. Open the DVD disc tray or lid.
  3. Press 8 - 1 - 3 - 2 - 8 (81328 in sequence) on remote control.
  4. In DVD region code menu, press Enter until come to region 9 (or 0)
  5. Press Play.
  6. Close the DVD tray or lid.
For Durabrand Dual-900, try the following DVD multi-region or region free unblock sequence instead.
  1. Press Open to open disc tray.
  2. Press Clear.
  3. Press 1 - 3 - 6 - 9 - 0 (13690 in sequence).
  4. Press Standby button. After pressing, the DVD disc tray will close and DVD player will switch off).
  5. Press Standby button again to power up the DVD player.
Note: To set back the DVD player to region 1 if you’re using above unlock hack, simply press 13691 in sequence. The 0 or 1, the last digit in the key sequence is actually the digit to determine which region code you’re going to set on the DVD player. You can set to other region code by changing the last digit to 2, 3, 9 or other valid region code number.
For Durabrand DP305, try the following DVD region code unlock hack instead.
  1. Turn on the DVD player.
  2. Press Open/Close button to open the disc tray.
  3. Press Setup.
  4. Press 8 - 8 - 8 - 8 (8888 continuously).
  5. Press Next.
  6. Go to “Version and select a region code. Select 0 for all region or 9 for region free.
  7. Press Play.
The below trick should be able to unlock the region restriction on Durabrand DUR1700 DVD player.
  1. Turn on the DVD player.
  2. Press Setup.
  3. Go to “Preferences”.
  4. Press Play.
  5. Enter 2 - 5 - 1 - 5 - 3 - 5 (251535 in continuous sequence of keys).
  6. Press Left, Down.
  7. The current region code will be displayed.
  8. Press 0 for region free.
Note that if you select “Region 0′ which allows DVD players to plays all DVD-Video discs from Regions 1-6, some DVDs which are incorporated with “Regional Coding Enhancement” or RCE protection system will refuse to play in such machine.

Jensen JR400... • Answered on May 28, 2020


Jul 23, 2019 - With the tablet completely off, press and hold the Volume Up (+) button, and while continuing to hold that button, press and hold the Power button for several seconds. Once the Sony logo appears, let go of the Power button.

Jensen Televison... • Answered on Aug 22, 2019


0079 0104 0107 0110 0166. Check these codes. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. Do a search by type in the brand name of your device at its search box. http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/

Jensen JER-422... • Answered on Jul 17, 2019

Not finding what you are looking for?
Jensen Logo

1,036 questions posted

Ask a Question

Usually answered in minutes!

Top Jensen Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Are you a Jensen Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...