I want to strip the concrete floor that I use
1
Make sure that the surface of the concrete is cleaned thoroughly. Remove stubborn dirt or stains with a mixture of one part degreasing cleanser and two parts water. Rinse the concrete well and wait 48 hours before continuing.
2
Use a large paintbrush or a long-handled paint roller fitted with a fine-nap roll to coat the entire concrete surface in a thick layer of soy-based or other environmentally-safe chemical stripper. Allow the stripper to eat away at the sealant for 10 minutes, scrape up the peeling sealant with a paint scraper or putty knife. Clean up all of the debris.
3
Rinse concrete to remove all of the stripper. Let the concrete dry 48 hours. Apply the new sealant or the finish of your choice .
What universal remote can I
Most universal controllers will be able to work with any Daenyx TV, you just need to find the correct code.
I bought what I think
Jasco Products does an excellent job in providing on-line manuals for most all their products. See this manual at -
http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/51207-Manual-Eng.pdf
Not finding what you are looking for?