Janome Sewing Machines - Popular Questions, Answers, Tips & Manuals


https://www.mybluprint.com/article/janome-sewing-machine-troubleshooting

Janome Sewing... | 30 views | 0 helpful votes


Check cam setting. Usually when the fabric is too bulky and the machine does not have enough force to push the needle through, try to rearrange the seam or try a few turns by hand.

Janome Sewing... | 20 views | 0 helpful votes


SADLY I CAN NOT AS WHEN THEY STARTED MAKING HEM THE WAY THEY ARE NOW i GAVE UP SEWING ELECTRONIC'S FAIL TOO OFTEN FOR MY TASTE. CONTACT THE COMPANY'S TECH SUPPORT AND GOOD LUCK
PLEASE VOTE IT THIS HELPED YOU

Janome Sewing... | 28 views | 0 helpful votes


Usually when the fabric is too bulky and the machine does not have enough force to push the needle through, Check cam settings.
Try to rearrange the seam or try a few turns by hand.

Janome Sewing... | 19 views | 0 helpful votes


Usually when the fabric is too bulky and the machine does not have enough force to push the needle through, try to rearrange the seam or try a few turns by hand. Check cam settings.

Janome Sewing... | 19 views | 0 helpful votes


https://www.youtube.com/watch?v=aQgVgeksE9w

Your Needle Plate Screw Is Loose The little screw that holds your needle plate in place can come loose and cause a knocking noise as your machine vibrates while sewing. ... Check to make sure the screw is tight. This is a more common problem if you must remove your needle plate to get to your bobbin case.
https://sewingsociety.com/why-is-my-sewing-machine-making-a-knocking-noise/

Janome Sewing... | 23 views | 0 helpful votes


What is wrong with my machine when this appears on the screen "stepping motor error"?
The stepping motor feeds the material through the foot of the machine.
It appears that you have an issue with this motor.
You can check the machine, oil and clean the machine to see if this helps.

Janome Sewing... | 21 views | 1 helpful votes


The TD init error indicates an initialization problem with the automatic thread tension motor. Either a wire connection between this motor and the control board is loose or damaged or the motor has failed. This is from the Janome Service document: http://www.janomeservicevideos.com/wordpress/wp-content/uploads/2015/02/Error-Codes.pdf .

Since the MC6500 is a computer with a sewing machine, you may not want to repair this yourself. A sewing machine service technician is a better choice to look at the machine, if you do not have training with electrical repairs. I don't know if a Janome repair technician will have the thread tension motor for this sewing machine. However, none of the other sites for sewing machine parts that I checked have this part in stock.

I wish that I had better news for you.

Cindy Wells

Janome Sewing... | 58 views | 0 helpful votes


MANY MACHINE IT IS NOT POSSIBLE WERE I YOU I WOULD CONTACT JANOME TECH SUPPORT TO FIND OUT THE ANSWER

Janome Sewing... | 30 views | 0 helpful votes


https://toews.com/wp-content/uploads/sewing-manuals/Janome%20MC4900QC%20Instruction%20Book.pdf

Janome Sewing... | 57 views | 0 helpful votes


I searched the internet using https://www.google.com

The following web reference from many years ago gave two suggestions.

https://sewing.patternreview.com/SewingDiscussions/topic/56185

Janome Sewing... | 17 views | 0 helpful votes


What is wrong with my machine when this appears on the screen "stepping motor error"? The stepping motor feeds the material through the foot of the machine. It appears that you have an issue with this motor. You can check the machine, oil and clean the machine to see if this helps.

Janome Sewing... | 19 views | 0 helpful votes


BEING THAT THIS IS ONLY A FORUM WE DO NOT MAIL THINGS WE DO NOT HAVE CHECK WITH JANOME PERHAPS THEY HAVE A .PDF FILE YOU CAN DOWNLOAD

Janome Sewing... | 58 views | 0 helpful votes


Direct from Janome

Manuals - Janome

www.janome.com > support > manuals
Software & Manuals. Current Models. Computer Models ... Embroidery Models ... If your machine is not listed there we do not have a copy of the manual.

Janome Sewing... | 65 views | 0 helpful votes


Be sure stitch is in between the two fabrics when straight stitch. Adjust tension until stitch is between top and bottom fabric. Use different color top thread to make it easier to see. Once tension is correct sewing straight, switch to zigzag.

Remove hook race and bobbin. Clean area with vacuum.
Replace needle.
Try different thread and fabric.

Janome Sewing... | 61 views | 0 helpful votes

Not finding what you are looking for?
Janome Logo

5,777 questions posted

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Cindy Wells

Level 3 Expert

6101 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...