Radio is LOCKED 10 how do I UNLOCK I do have the code and serial number Jaguar S Type 1996
how to is covered in your LOST , glove box , users guide.there can be 10 radios offered on a new car,so get your guide from Jaguar it this there, no coUNTRY TOLD SO only ask thereyou invite wrong answers not telling the countrycall JAG on the phone and ask them for the stepsif not a JAG RADIO say so , and tell makers name and model or ask them , for the lost manual
Jaguar p0251 p025b p025c, car wont fire up.
The error codes P0251, P025B, and P025C indicate an issue with the fuel system. The P0251 code suggests that there is a problem with the fuel injection pump, while the P025B and P025C codes indicate issues with the fuel pump module.
Given that the car is not firing up consistently, it's likely that the fuel system is not delivering enough fuel to the engine. This can cause the car to go into limp mode and eventually cut off. The P2463 and P246B codes are related to the diesel particulate filter (DPF) system, and the B1412 and B100D codes indicate issues with the climate control system and passenger airbag.
Based on the symptoms you described, it's possible that the fuel system issue is causing the other error codes to appear as well. It's recommended to take the car to a qualified mechanic or a Jaguar dealer to have it diagnosed properly. They will be able to use a diagnostic scanner to read the error codes and perform further tests to determine the root cause of the issue.
Adjust headlamps on 2008 Jag Vanden Plas
- Park your car on a level surface, facing a flat wall or garage door. Make sure the car is at a normal operating temperature and that the headlights are turned on.
- Open the hood and locate the headlamp adjustment screws. These are usually located at the back of the headlamp assembly, near the firewall. There should be one screw that adjusts the vertical aim and another that adjusts the horizontal aim.
- Use a Phillips head screwdriver to adjust the screws. Turning the vertical screw clockwise will lower the beam, while turning it counterclockwise will raise the beam. Turning the horizontal screw clockwise will move the beam to the right, while turning it counterclockwise will move the beam to the left.
- Adjust the headlamps one at a time. Cover one of the headlamps with a thick cloth or cardboard to prevent any stray light from affecting your vision while you adjust the other headlamp.
- Aim the headlamps so that the center of the beam is at the same height as the center of the headlamp lens. The horizontal aim should be straight ahead, with no visible lean to either side.
- Test the headlamps on a dark road to make sure they are properly aimed. If you notice any unevenness or misalignment, make further adjustments as necessary.
- Close the hood and enjoy your properly adjusted headlamps.
It's important to note that if you're not comfortable working with car electronics, or if you're unsure about any of the steps involved in adjusting your headlamps, it's best to consult a professional mechanic or authorized Jaguar dealership for assistance.
2005 jaguar x type touch screen blank. Codes 50 and 51
If the touch screen on your 2005 Jaguar X-Type is blank and you are receiving codes 50 and 51, it indicates that there is a communication error between the audio control module and the touch screen display.
Here are a few things you can check:
- Wiring and connections: Check the wiring and connections leading to the touch screen display and the audio control module to make sure they are in good condition and properly connected. A loose or damaged wire can prevent the display from working correctly.
- Audio control module: The audio control module is responsible for sending information to the touch screen display. If the module is malfunctioning or damaged, it can prevent the display from working properly. Check the module for any signs of damage or wear, and replace it if necessary.
- Touch screen display: If the display itself is malfunctioning, it may need to be replaced. Check the display for any signs of damage or wear, and replace it if necessary.
- Software update: There may be a software update available for the audio control module that can fix the communication issue. Check with a Jaguar dealership to see if there are any updates available for your vehicle.
Not finding what you are looking for?