Jacuzzi Pool & Spa - Recent Questions, Troubleshooting & Support


Impeller may be broken or clogged. Turn the pump off and remove the basket. Reach back into the pump with your fingers and see if you feel debris. If you can't reach or if there is debris you will need to open the back of the pump, take off the diffuser, and clean out the impeller.

Jacuzzi Pool &... | Answered on Aug 25, 2020


i would contact the place you bought it from. i assume its a gas heater and the rollout switch turns the burner on

Jacuzzi Pool &... | Answered on Aug 25, 2020


Without knowing the code it could mean anything. Consult your owners manual or online manual for error codes and remedies.

Jacuzzi Pool &... | Answered on Jul 06, 2019


You have a: Single Stage Jet Pump, c/w Cast Iron Construction, Thermoplastic Impeller, .... coupled to a :
1/2 HP, 115/230 Volt Motor with a 1" x 1-1/4" Discharge x Suction. If you can't find a Jacuzzi, you can always replace it with one of like specs. Check a local plumbing supply dealer or online ...
https://www.grainger.com/category/well-pumps/pumps/ecatalog/N-hve This may also help:

Jacuzzi Pool &... | Answered on Jul 11, 2018


probably the element shorted out and caused the problem
get in an electrician to check the wiring and circuits

Jacuzzi Pool &... | Answered on Mar 24, 2018

Not finding what you are looking for?
Jacuzzi Logo

336 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Pool & Spa Experts

Mike

Level 3 Expert

4369 Answers

john h

Level 3 Expert

23438 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Jacuzzi Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...