iSonic Video Cameras - Recent Questions, Troubleshooting & Support

The battery can die when not used for years. Try with a new one.

Simplemente descarga las imagenes a tu apple y despues las importas a Final Cut. En principio no necesitas ningun software puesto que esa camara, si no me equivoco graba en mp4. Puede que tengas problemas con el codec... en ese caso, tendras que convertir las imagenes a un codec que reconozca el Final Cut (por ejemplo H264).Espero haberte ayudado.

you need a NP60 Li-ion Rechargeable Battery

buy at
http://www.amazon.com/Hi-Capacity-Li-Ion-Digital-Battery-FinePix/dp/B0000X65K6/ref=sr_1_2?ie=UTF8&qid=1316644633&sr=8-2

look the connectors

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Which exact capacity and type of SD card are you using? Your camera is a basic budget model which cuts costs by using proven reliable but older technology. As such it only supports a maximum capacity 2GB SD card.

What you describe is typical of either using a (very rare) 4GB SD card, or far more likely an SDHC card (they start from 4GB and go upwards). SDHC cards look the same as SD cards, but have different internal hardware and are incompatible with all earlier SD only devices.

If my guess is correct then your fix is to replace the memory card with a 2GB SD card; your camera cannot be updated to accept larger capacity models and lack the hardware to use SDHC cards.

Given the relatively low but entirely adequate sensor resolution of 5 megapixels for digital stills (ignore the useless "12MP interpolation") and very low VGA video resolution (fine for most internet use), then 2GB is more than plenty. If you need more recording capacity then just carry another 2GB card with you, but if so then you'll also need additional batteries as they will run flat before you fill a single 2GB card.

The battery of my SNAPBOX AV50 does not take a charge. I would like to know if you have the battery fits the model indicated.Perhaps with greater capacity and lonmger life and cost method of payment. Thanks !
my address email [email protected]

If the camera has a memory card... and you need to transfer you images to the pc, then the easiest method (without having to use drivers) is to buy a card reader and use that. I'm surprised it came without drivers.

Additionally, could check if some of this could help: windows/compatibility/windows-7/iSonic%20SNAPBOX%20DV51 (sometimes, upper versions support other devices).

Hope helps.

Hi,
Please the driver here : www.tomshardware.com > Forum > Windows 7 > Drivers
www.sevenforums.com > ... > Drivers
www.soft32.com/.../Windows/Drivers/2-52.html
www.usbman.com/news/3comhomeconnectdrivers.htm
Regards, Jay__jgmnhyre34

Hi,

Click on the link below and choose the Isonic Snapbox DV 747 link to enter the details to get more information and instructions on how to use the Camera
Camera Manual Link

They have not yet released the User Manual but you can get more information once you click the top link.

Regards,
FixYa Team

look on ebay

call 212-414-1798 they carry spare parts for this camera

in a concert hall the sound go in your mic is to hi
for is frequency range i think that is normal try to
record beside a road or child near playground

NEED SOLFWARE FOR THE 550

maybe your cam is too old. is it new? if so, then return it cand get a new one. if its old, thats the problem