iRiver Audio Players & Recorders - Recent Questions, Troubleshooting & Support


Iriver e100 hard reset

Ligaciputra the best site for gaming online. website :
1/22/2024 12:38:20 PM • iRiver E100 ... • Answered on Jan 22, 2024

When connecting iRiver Clix with computer, it charges only the battery. How can I put it in USB mode?

It is circa 2007 so probably looking Windows XP and Windows Media Player 11. Not compatible with your computer Operating System is the most likely reason. You may be able to force the computer to look for drivers. ..
11/7/2023 11:31:31 PM • iRiver Audio... • Answered on Nov 07, 2023

Can not transfer or down load music to my new Ipod

Download a free copy of itunes.after install plug ipod in and set-up.a new ipod does not have files required for loading.Your download is here you require further assistance contact me here at FixYa.please do not forget to vote.RICHARDM69
12/16/2022 8:40:35 AM • iRiver E100 ... • Answered on Dec 16, 2022

How long does it take to charge an iriver when

Whew, that's way past the maximum. :) The charging time should be 3.5 hours.

8/4/2022 8:41:58 AM • iRiver E100 ... • Answered on Aug 04, 2022

Iriver pmp 120

i could help you repair this email me at [email protected] i had the same problem i fixed it my self
4/18/2022 6:38:15 PM • iRiver PMC-120... • Answered on Apr 18, 2022

Downloading movie length DVD to iriver x20

Yes, you need to convert all your movies to a format iRiver and understand and play.

Here's a link:
Movie Converter for iRiver and instructions

I'm not sure whether Movie Converter supports original DVD files. If that is not the case, then you'll have to convert DVD video into a format that iRiver X20 can use, and then feed that new video to Movie Converter.

However, that would be a bit redundant: to save on time and quality, you could use other video Conversion tools, such as SUPER:

After loading your DVD, you set the parameters to mirror those accepted by your iRiver model. In case of iRiver X20, those parameters are:

Extension: AVI [[also known as container]]
Video Codec: WMV9 SP, MPEG-4 SP [[MPEG-4 = XVID, DIVX]]
Video Resolution: max 320 × 240
Video Framerate: max 30 fps
Video Bit Rate: max 512 kbps

After successful conversion, upload your new video file to your iRiver X20 and play it back. If it plays [and plays correctly] - then congratulations - it works! If it does not play, then you might have made a mistake while setting the output parameters in SUPER.

Hope it helps. Rate me. Thanks.

.:: Cyberneticus ::.
6/26/2021 9:15:49 AM • iRiver X20 MP3... • Answered on Jun 26, 2021

How can I just copy CD's onto my player?

Hi there..

First i'd say find out the file format of the song you have in CD.
If its .CDA format then use Windows Media Player to rip it as MP3 format.
(Provided u should have WMP 10)
After you rip into MP3 format.
Connect the cable from MP3 device to computer and transfer it..

Thats it...
4/12/2021 6:25:13 AM • iRiver H10 MP3... • Answered on Apr 12, 2021

How to open IRiver T20 MP3 Player to replace battery

The T20 has a 'built in' battery like most modern mobile phones have. Changing the battery isn't easy, it involves taking the player apart to access the battery. It may be easier to replace the whole MP3 for a new one.
1/19/2021 10:33:11 AM • iRiver T20 MP3... • Answered on Jan 19, 2021

System files missing - need

Tenorshare Data Recovery- a professional data recovery program that can recover data after deeply scanning your media drive to look for lost data. I have succeed to recover pictures from my MP3 with it.By the way,you can download it and scan your player for free to preview whether your files can be recovered.Get it from
8/4/2020 12:07:08 PM • iRiver H10 MP3... • Answered on Aug 04, 2020

Can't play videos on iriver e100

how do i play the videos
5/29/2020 8:49:59 AM • iRiver E100 ... • Answered on May 29, 2020

My iRiver e200 does hang...and it displays "USB busy.. Do not Disconnect if I connect it to PC. And I cannot play my MP3s

Hi there! Well it sounds like the flash memory in your device has failed. This may not be the case. There is no way to say without testing and diagnostics, however if you can not access the files saved to the memory via the device(Playing the files) and the computer can not access that memory when connected, there is a strong possibility that your memory has failed. I am not sure the age of the device but it is well documented that all flash memory will at some point fail because it can only be read and re/written X amount of times(this is normal). Typically most devices will reach "EOL"(End Of Life), or end of use before the memory fails. The likely hood of recovering the files located within the inaccessible memory is very unlikely but may be possible. Replacing the memory chip in the device is possible but not feasible. I hope I have been able to help you today. Please if I misunderstood your question let me know so I can get you the appropriate help. Thank's Mr.Mike
5/20/2020 12:55:47 PM • iRiver Audio... • Answered on May 20, 2020

I get no results for "Artists", "Titles" or "Albums" from Music menu

If those files weren't premarked properly on computer before synchronizating (you can do that in WMP 10 with advanced tag editor) it's not likely you'll get those results. You can add those info on computer and sync files again.However, if all of these files are marked properly (have filled Artist, Title and Album sections in advanced tag editor) maybe database is corrupted - what you need to do is refresh it. (Settings>Extra>DataBase Refresh>Yes)
4/24/2020 3:01:43 AM • iRiver H10 MP3... • Answered on Apr 24, 2020

Where can I get the driver and music manager for

iRiver IFP-799 is a IFP-700 series player.

Making transfers to the device can be done in either UMS or Manager mode.
UMS firmware matches with seeing the player as a removable disk in Windows Explorer and is also used for updating firmware, using iRiver PLUS software.
Manager firmware matches with iRiver Music Manager software.

When needing the Music Manager go to next site and enter the word
manager in the second column next to GO:
iriver music manager ( Ver. 3.21 ) shows up: click the item and read
the instructions for download and installation.

How to update the player's firmware
in MSC mode:
in Manager mode:

Need more help ? Just post a comment.
1/26/2019 6:19:58 PM • iRiver iFP-799... • Answered on Jan 26, 2019

Hi, I need the USB driver for Iriver IFP-790 music player. Thanks Jakob

Apparently it is not compatible with newer versions of Windows, but there may be a workaround solution. Which version of Windows are you trying to install a driver for?
10/19/2018 10:06:02 PM • iRiver Audio... • Answered on Oct 19, 2018
Not finding what you are looking for?
iRiver Logo

Family Lines

2,180 questions posted

Ask a Question

Usually answered in minutes!

Top iRiver Audio Players & Recorders Experts


Level 3 Expert

1124 Answers

Mohammad Abumuailek
Mohammad Abumuailek

Level 2 Expert

104 Answers


Level 2 Expert

691 Answers

Are you an iRiver Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides