IO Magic Corporation Recent Questions, Troubleshooting Help & Support

Have you tried to burn anything?

I had this with a new drive, think it's the firmware in the drive.Anyway the warehouse replaced the drive.

The harddrive has crashed very hard to fix give it to a professional to fix if not its already condemned

Go to My Computer right click and select properties and under Device manager click under Disk Drives uninstall the drive. If you cannot see your hard drive then select scan for hardware changes. Also when you start your computer click on F12 and go into BIOS settings and check if you can see your hard drives

use driver identifier software to freely and easily download drivers for all the device that you can plug with your pc. use the following link. http://driveridentifier.com/files/driveridentifier_setup.exe Note: No payment or card is needed. just sign up and select the non-commercial use plan and enjoy free downloading

Not sure if this will help, but was having the same problem. I separated the power cord to the AC adapter brick and reconnected it. My computer immediately recognized it!

I had a similar problem. I found out for me I had to many HDD's. Once I disconnected the other HDD's (except C: drive) I was able to initialize it. Let me know if this works for you.

Try this OMagic Cables (bottom left CP1205) You may need to write (email) to them re European distributor/retailer

People often feel panic when I see this. If I format the drive, will I lose all my data? If not, how could I get access to my files?My take is that you may have to format the drive and then use data recovery software to recover your files.Here's some information about file recovery, think you need to take a look, very usefulhttp://www.asoftech.com/adr/