Integra Recent Questions, Troubleshooting Help & Support

Help here https://www.google.com/search?q=integra+dtr+5.3+goes+into+protect+mode ..

Hi, Please confirm that the remote has power and move closer to the receiver and attempt to use the remote again. If the remote works when you're closer, then this means that your batteries needed to be updated. If the remote does not work even within 1 foot of the receiver, please clean the section of the receiver that receives the remote signal. You can then restart your receiver and attempt to use the remote again. If this fails, then you can attempt to re-program your remote to the receiver once more. Otherwise, you might need to work with Integra to further troubleshoot the possible source of the issue. Thank you.

If using a router is the firestick an allowed device? If not you need to allow it in the security/allowed devices page.

Sounds like you have entered the code the wrong way 3 or more times, you will need to disconnect all power to the unit for a at least 20 mins, then reconnect and try pass word again.

http://www.integrahometheater.com/faqs.php Check the connections and try a master reset? Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

P0172 HONDA - Fuel System Too Rich Bank 1 Possible causes: Faulty front heated oxygen sensor. Ignition misfiring. Faulty fuel injectors. Exhaust gas leaks. Incorrect fuel pressure. Faulty Mass Air Flow (MAF) sensor.