iLO Televison & Video - Page 2 - Answered Questions & Fixed Issues


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

iLO Televison &... | Answered on Jan 06, 2017 | 32 views


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

iLO Televison &... | Answered on Oct 08, 2016 | 35 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

iLO Televison &... | Answered on Jul 25, 2016 | 75 views


You would need a converter to make it work. Adapters won't work as the type of signal would need to be changes. Your best bet would be to purchase a DVD player that has outputs that work with the tv. Sorry.

iLO 2600... | Answered on Jul 07, 2016 | 244 views


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

iLO Televison &... | Answered on Jun 03, 2016 | 39 views


Do a reset to this tv, and check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

iLO Televison &... | Answered on May 18, 2016 | 68 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites http://electro-medical.blogspot.com/ . It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

iLO Televison &... | Answered on Apr 02, 2016 | 32 views


Is this a pass code that someone else has set?If so,the only way is a lucky guess,ha,i did it that way one time.if you set it,it should be easy to reset,just go to change passcode.when I have login,i can use password or pass pin.is this the kind of passcode your talking about?or on a debit card?there is a # you can call to change it.

iLO DVDR05 DVD... | Answered on Jan 22, 2016 | 73 views


These ilo R04 only record on 4x speed or slower, the new 8x or 16x won't work or will damage laser.The new variable speed discs work,these say 1x-16x.
Some brands of discs won't work in Ilo's.Try name brands disc like Sony, cheap brands often won't work.
Have you cleaned laser use commercial disc cleaner?Laser can be manually cleaned with a Qtip soaked in rubbing alcohol but this requires opening dvd burner.If you do this make sure electrical plug is pulled, laser will cause serious burns if you remove top while still plugged in.

iLO DVDR04 | Answered on Jan 04, 2016 | 636 views


Tuner fault; suspected. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

iLO 3200 32 in.... | Answered on Dec 27, 2015 | 87 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

iLO Televison &... | Answered on Dec 09, 2015 | 52 views


Refer its user manual for details.

iLO Televison &... | Answered on Dec 09, 2015 | 62 views


ILO universal remote code - Fixya

www.fixya.com/support/t149216-ilo_universal_remote_code
ILO universal remote code There is no code for ILO TV in my universal remote codelist. ... I have a 27" ilo sdtv. Bought the ..... Sep 09, 2006 ' iLO 2600 Television ...

i have a ilo sdtv and the remote codes direct tv gives wont ...

https://answers.yahoo.com/question/index?qid...
Dec 18, 2008 - does anyone know what to do i can't even find the manufacture for this brand.

RCA 4 digit codes (3) - eliztech.com

www.eliztech.com/remotes/rca-codes-4digit-v3.php
RCA universal 4 digit remote codes for RCR3273 RCR3373 RCR4257 and R55L8_Code_02. ... ICE, 1065. ILO, 1054, 1133, 1168, 1169, 1206, 1230. IMA, 1035.

Does SDTV = ATSC tuner - AVS Forum ' Home Theater Discussi


iLO Televison &... | Answered on Dec 09, 2015 | 250 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

iLO Televison &... | Answered on Dec 07, 2015 | 88 views


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electro-medical.blogspot.com/

iLO Televison &... | Answered on Dec 06, 2015 | 75 views


Generally recording machines fitted with an analogue tuner can only continue to be used to record digital tv by using a digital set-top box.
It would not be practical or economic to remove the internal analogue tuner and replace it with a digital tuner unless the person is a highly skilled and experienced repairer.

Digital set-top boxes are available from all sorts of outlets at all sorts of prices. Many surplus boxes can be found at boot sales, garage or yard sales or charity shops at very low prices.

Most boxes have the minimum of connections and often offer only a scart output but some of the older, more expensive and usually better quality boxes also contained a UHF tuner in a similar way to the old vhs recorders so even older tv sets could be used with digital even though no scart input was fitted.

iLO DVDRH04 DVD... | Answered on Dec 03, 2015 | 89 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Circuit diagrams of SMPS section of many popular brand devices are given.

iLO Televison &... | Answered on Dec 02, 2015 | 63 views


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

iLO LCT32HA36... | Answered on Nov 27, 2015 | 55 views

Not finding what you are looking for?
iLO Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top iLO Televison & Video Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...