iLO Televison & Video - Popular Questions, Answers, Tips & Manuals


https://www.youtube.com/watch?v=albpaPY6PFk

iLO Televison &... | 32 views | 0 helpful votes


that usually refers to Digital Television.
The signal can be analogue
or
The signal can be coded in a digital format over an analogue radio signal. Via quadrature PSK modulation encoding see
https://www.electronicdesign.com/technologies/communications/article/21798737/understanding-modern-digital-modulation-techniques
for a more detailed explanation on how a digital signal can be transmitted onto an analogue radio carrier .

iLO Televison &... | 47 views | 0 helpful votes


It could be the power or main board that is giving issues...if your able pull the back off and look for a pin on connector marked PSON or PON...that is line that tells the power board to come out of sleeping and go to work, you should see a change in the voltage when the on button is pushed, if you do then the main is doing its work and its the main if you don't see a voltage change then chances are its the power board

iLO LCT32HA36... | 217 views | 0 helpful votes


Check the tvs settings menu. There should be a HDMI sound option which will fix the delay.

iLO 3200 32 in.... | 137 views | 0 helpful votes


Hi there!

Get somebody to check the circuitry of the tv please start with power supply section may be a fuse as blown if blown replace it or a component has blown due to AC .

iLO Televison &... | 41 views | 1 helpful votes


I was able to find a service manual online which lists the inputs for that TV as the following:

  • RF connector (cable/antenna)
  • Composite (yellow video, red/white audio)
  • S-Video
  • Component (red/green/blue video, red/white audio)
  • D-Sub (analog PC connector)
  • DVI (digital PC connector)
Your Playstation would need to be plugged into either the component or composite connectors depending on which Playstation you have. The Playstation 1, Playstation 2, and Playstation 3 all can use the same composite cable, and the Playstation 2 and Playstation 3 can both use the same component cable. The Playstation 4 only uses HDMI, which your TV doesn't support, so you would need to use an HDMI to component converter (under $20 on Amazon).

As for the Roku, same rules apply, but it again depends on your Roku model.

iLO Televison &... | 69 views | 0 helpful votes


check the hdmi out with another device that takes hdmi, the hdmi system works on its own from the av board side of the av board. has its own settings. then main board will have a large chip on the board and this is the hdmi control chip. these can go on there own and not afect any other part of the tv

iLO LCT32HA36... | 501 views | 0 helpful votes


Try ebay. If unsuccessful you may have to convert the plug on your set to a standard one that will work with a normal standard wire.

iLO V27DMBX... | 81 views | 0 helpful votes


Without an remote you may not be able to. Try to channel down on the TV itself down past two to see if input shows up

iLO Televison &... | 1,234 views | 0 helpful votes


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

iLO 3200 32 in.... | 92 views | 0 helpful votes


old school TV

if it isnt flat batteries in the remote

or desk top set problem

replace the TV


e343a3d3-a182-4ff3-bf63-0bfe7cfa165a.jpg

741f05ff_vbattach180236-olcg2atjfgvqeua02cz5euu5-5-2.jpeg

iLO Televison &... | 61 views | 0 helpful votes


I had the same problem with another store with grass trimmers. i tried to take it back and they gave me the manufacture phone number and yes it was China. They accused me of using it wrongly. All i did was put gas and oil mixture in it and tried to operate it like others I purchased. It never ran ten minutes but when I took it back they said it was used. Then they said if I spent more money and buy a good one they would cover it. WHY SELL JUNK.

iLO LCT32HA36... | 58 views | 0 helpful votes


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

iLO Televison &... | 56 views | 0 helpful votes


Here's the original owner's manual for your TV!

P42BSMT Owner's Manual
https://www.remotes.com/v/vspfiles/files/owners-manuals/P42BSMT-TATUNG.pdf

It's worth noting that while the TV in this manual is branded as Tatung, it is the same as your iLo television.

iLO Televison &... | 68 views | 0 helpful votes


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

iLO Televison &... | 32 views | 0 helpful votes


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

iLO Televison &... | 35 views | 1 helpful votes


You would need a converter to make it work. Adapters won't work as the type of signal would need to be changes. Your best bet would be to purchase a DVD player that has outputs that work with the tv. Sorry.

iLO 2600... | 244 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

iLO Televison &... | 74 views | 1 helpful votes

Not finding what you are looking for?
iLO Logo

2,043 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top iLO Televison & Video Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...