Howard Miller Home - Page 5 - Recent Questions, Troubleshooting & Support


It depends on where it leaks. The wax ring that seals the toilet to the waste pipe could be old and dried out. The seal between the tank and the bowl could be old and dried out. The water supply line could be leaking.
If you want a stranger on the internet to offer you advice your question needs to be very specific. And you don't have a clue about toilets, best to call a plumber.
Sure this is fixable by a handy DIY person. But if that was you, then your question would have been more specific.

To know more about repair kits, check Best Toilet Repair Kits 2020

Home | Answered on Jul 22, 2020


Full strength bleach...let soak 24 hrs

Home | Answered on Jul 22, 2020


The problem is that all shower heads sold now have to be low water volume. You can take the restrictor out and see if that helps. Look for a blue or white plug type insert in the fixture that has a slot on it. Pull it out and you should be good.
http://homeguides.sfgate.com/remove-water-restrictors-showerheads-27817.html
and http://www.ehow.com/how_5189790_remove-flow-restrictor-shower-head.html

Home | Answered on Jul 20, 2020

Tip

Wedding Photography Tips


Try some different things with these basic however simple postures, for example,

Up close,

Brow to temple,

Embracing,

Holding hands,

Demonstrating the ring,

Sitting on lap,

Lying on backs,

Inclining in and strolling.

Source: Innovative Wedding Photographers Singapore kent wong

on Jul 18, 2020 | Home


I have a Kohler toilet and Ingenium fill valve 85297-AA. My toilet kept running, the fill valve black cylinder wouldn't pop up and when I added blue food coloring to the tank, the blue color seeped through to the toilet bowl. First I replaced the flapper and that allowed the fill valve piece on the cylinder to pop up correctly and blue dye no longer seeped through to the bowl. I still heard a hissing sound when the toilet tank had filled and no water was going into the overflow tube. I called the tech support number on the Kohler website 1-800-4KOHLER (1-800-456-4537) . Here's what solved the problem: Turn off the water to the toilet.Take off the white cap of the fill valve by pushing it down and turning it counterclockwise as you would open up a childproof pill container. Then unhook the metal hook. Hold a cup upside down (I used a strong plastic cup) over the part of the fill valve that is left in the tank and turn on the water. (You need the cup because otherwise the water will squirt up to the ceiling.) The water will flush out the fill valve. Replace the cap and the hook and flush.

Home | Answered on Jun 11, 2020


Contact the manufacturer parts department!

Home | Answered on May 30, 2020


I'm having the same problem. Did you ever find a solution?

Home | Answered on May 28, 2020


How do you change the battery in the no touch thermometers by medline

Home | Answered on May 28, 2020


Pull the battery cover down to reveal the battery!
The battery cover is the darker colour end!
Replacement is a reversal of removal!

Home | Answered on May 28, 2020


https://writeupcafe.com/blog/cryptocurrency/1255530-atomic-wallet-support-number??1856-254-3098??/

Home | Answered on May 19, 2020


However, Atomic wallet is available in desktop and mobile versions which provides convenience. And it is a decentralized wallet where you will get private key for every coin you store in it. It is an open source wallet which means no one can infuse any malicious code into it.
https://steemit.com/atomic/@abhijeetcg/atomic-wallet-comparison-with-other-existing-crypto-wallets

Home | Answered on May 14, 2020


Depending on size of break strength needed. I use a 2 part 5 minute epoxy glue. Stir it well together with a tooth pick and use it to apply a very thin coat to both surfaces the squeeze them together once holding I carefully use a sharp cutter to remove the glue seam at the crack before it goes completely hard.not to be done too early as the glue will smear hope this helps.

Home | Answered on May 13, 2020


I believe the whole back needs to be removed I cant remember if it is pop off or held on with a screw. Battery is AA minion

Home | Answered on May 13, 2020


The company says it's out of production until the Fall of 2011. It's being moved to a different manufacturing plant. The **** who made the decision didn't have enough brains to stock pile before the move. ****.

Home | Answered on May 08, 2020


Replacement style led's lamps are available for nearly any fixture. Take one of the halogens to your local box store and ask for a replacement led.

Home | Answered on May 02, 2020


Toilet tank won't fill up or is slow to fill. The most common reasons for a valve to slow down or no longer fill the tank after the flush are debris issues and the length of time a valve has been in use. ... Valves in use for a period of 7 years or more can have their working parts start to wear out. 1.
https://www.fluidmaster.com/toilet-problems/remove-fill-valve-cap-replace-seal-toilet-wont-fill-slowly-filling-tank/

Home | Answered on May 02, 2020


I use Crazy Glue because it is very thin, so it allows the parts to come together completely. Practice getting the parts to fit together perfectly before glueing. Don't use too much because it may spread out wildly as the parts are put together.

Home | Answered on Apr 25, 2020


onen battery compartment or online search using make and MODEL

Home | Answered on Apr 22, 2020


https://www.amazon.com/Swarovski-Melody-Motion-clock-2019-QXM382BRH/dp/B07XN4LXR4

Home | Answered on Apr 21, 2020

Not finding what you are looking for?
Howard Miller Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Howard Miller Home Experts

john h

Level 3 Expert

23515 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Howard Miller Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...