Hotpoint Kitchen Ranges - Page 3 - Recent Questions, Troubleshooting & Support

look for signs of a broken element is what I would do. Both broil and bake or out? if so that could be a breaker gone bad or bad control. anything lighting up? if not check breaker.

if it is gas , then you have no option but to turn the gas off at the supply tap until you can afford a gas fitter to come and check the problem if you continue to use it then the consequences could be you ceasing to exist form gas poisoning or an explosion

They will require a cleaning of the tubes and orafices. Blow out with compressed air.

Make sure that you slide the oven door latch all of the way to the left after the clean cycle. If the latch is still positioned to the right in the locked position then the CLEAN light will continue to blink. If the door latch lever is positioned properly to the left and the CLEAN light is still flashing then you could have a problem with the latch mechanism or the electronic oven control. You can try to reset the electronic control board by unplugging the range for several minutes (or shutting off the breaker for the range outlet) to completely disconnect electrical power. If the CLEAN light still blinks after you restore electrical power then you will likely need to have the range serviced by a technician.

look up online or appliance parts stores for replacement

What is the model number of the range

You are having connection issues, or a failing keypad. Disconnect the power. Pull down the control panel and disconnect the thin, flat ribbon connector that goes from the keypad to the control board, then re-connect the power and see if the F1 returns without the keypad attached. If it returns, get the computer board rebuilt at Corecentric Solutions. If the F1 doesn't return, buy a new keypad... Help Me Find My Model Number RepairClinic com