Hoover Freezers - Page 7 - Recent Questions, Troubleshooting & Support

It it turned on at the temperature dial? If it is, contact the seller. This is from another manual, but typical. Notice it mentions the 'OFF' setting. A storage basket is provided for the organization of odd-shaped items. To reach other packages in the freezer, just slide the basket to one side, or lift it out. 1 The first time you turn the freezer on, adjust the temperature control to the setting you want and run for two to three hours before putting food in. 2 After it is fully cooled, adjust the temperature control to the setting that best suits your needs. Settings include MIN, MAX, and OFF. Model numbers are useful in such questions. It looks like you have Arctic King ARC070S0ARBB 7 cu ft Chest Freezer, Black Brand: Arctic King.

google your model number

A few places but not many https://www.google.com/search?q=Parts+for+igloo+ice+maker+ICE103 ..

we have no way of knowing that

Orange light means it cannot cool properly. I would get it checked by a competent refrigeration engineer.

The green light may have failed without affecting operation.

Igloo direct seems to be the only place https://www.curtis-igloo.com/product/fr1082-2 ..

Check with an appliance parts supplier to determine whether the Ranco unit is a specified replacement for the Beaumark. Also, it is possible that the Ranco thermostat is defective, though new.

Probably the blinking green light is an indication that something is wrong with the compressor or a related component.

When it runs all the time it usually means it is running low on freon.

That unit is surprisingly clean. It may have had the fan module that you can see in picture, replaced and whomever replaced it, did not put the lug back on or it was not there with the newer unit.

Contact Imperial with your request.

Clicking sound is overheat at the compressor. There is a device called a Clixon that is cutting and restarting. Remove covers and clean the condenser grill with a vacuum cleaner and brush.

these units are usually set up to have the beater rotate in a clockwise direction facing front. If they get stuck, it is usually due to excessive wear or the hexed end has been lubed and has created a suction seal in it's counter part. Try rotating the beater in a counter clockwise direction while holding the drive wheel pulley stationary. Be sure to unplug unit first. this has worked for me in the past but can be very difficult at times.

Too high of water pressure letting in more water then it can drain off. Try turning down the water first

either a t-stat issue or if it does not run for more than a few seconds, your compressor is done for.

I Need two panels replaced on my Walkin Cooler, is there anyone that cacn give me a quote/price for this repair

Could anybody please tell me what the colored bottons for this freezer mean. I just got one second hand, plugged it in and there is a red light on. There is also a botton with an S and a circle with a line. I'm guessing that might be on botton but I don't know for sure. It hanks to anyone willing to help!! :)

Could you comment below with more detailed photos of the back of the orange switch and any other bits with it. If the switch isn't broken It might just 'click' back in. I don't know without better images.

There are video's on google that have trouble shooting for Igloo ice maker types and for the Igloo ice company and YouTube.