Honda Garden - Page 7 - Recent Questions, Troubleshooting & Support
Honda 2400 psi before it went out i cold tap the
hi,
there is a small ball bearing inside the nozzle on the end of the lance , this can get jammed or missaligned and the nozzle orifice can get blocked , clean this or replace the whole lance with another 200 Bar lance .
hope this helps
My Honda G300 engine runs for 5 minutes and then cuts out
You have 1 of 3 possible issues; a dirty carburetor, a clogged fuel line or your ignition module (attached to your plug wire) is going. If you can start the engine back fairly quickly it's probably the fuel. If it takes 10-20 minutes to restart, the ignition module.
1/22/2019 7:00:15 PM •
Honda Garden
•
Answered
on Jan 22, 2019
Honda Tiller revs and works for 30 seconds and then shuts down.
Hello. you have some gunk in the carburator. Get a can of starter fluid or carburator cleaner aerosol and a helper. Remove the air filter and start it up. Spray a little starter fluid into the air cleaner to keep it running for three or four minutes and the problem should clear. If it does not clear the carburator will have to be disassembled, cleaned and rebuilt. j.
Not finding what you are looking for?