Homedics Irons - Recent Questions, Troubleshooting & Support

0helpful
11answers

Plugged in, reset button is lit, won't go off

The problem is the thermostat (NC 150 C). A replacement is available at Digikey.com, item R2015025 (part no. 317-1468-ND) It's a simple replacement with the bottom removed.
8/21/2019 8:18:12 PM • Homedics PS-200... • Answered on Aug 21, 2019
0answers
0answers
0helpful
1answer

Would you return this PS200 steamer?

If the steamer starts making a "gurgling" noise, like its running out of steam, hold the hose straight up for several seconds. It says to do this in the manual and gets the steam flowing again--works great!
7/29/2012 4:57:18 PM • Homedics PS-200... • Answered on Jul 29, 2012
0helpful
1answer

The auto shut off is

sounds like a defective switch
5/25/2011 10:14:07 PM • Homedics PS-200... • Answered on May 25, 2011
0helpful
3answers

Home touch 300 no steam coming out

Hold the hose straight up fully extended for several seconds--it says to do this in the manual--and works great
12/18/2010 9:37:32 PM • Homedics PS-200... • Answered on Dec 18, 2010
0answers
0helpful
2answers

Iron with auto shut off will not restart, why?

The thermostat is the problem, I used aew3656's solution posted elsewhere, and took care of the same problem on my steamer, just take out the damaged thermostat and use it as a sample to get a new one from any electronics supply store, BTW dont forget to buy thermal grease, it helps dissipate the heat so your steamer won't overheat, and the thermostat wont't go off every 2mins.
6/6/2010 8:14:54 PM • Homedics PS-200... • Answered on Jun 06, 2010
Not finding what you are looking for?
Homedics Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top Homedics Irons Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39386 Answers

Are you a Homedics Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...