Hitachi Televison & Video - Page 3 - Answered Questions & Fixed Issues

0helpful
1answer

Hitachi le49s508 does not switch on easily...keep having to unplug and try again

Fault with the main power supply [SMPS] board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Type in the brand name of your device [exclude the model number] at the search box at the right column to get gathered related posts.
11/6/2021 5:45:59 PM • Hitachi... • Answered on Nov 06, 2021 • 65 views
0helpful
1answer

How to change time on hitachi KC08

Menu then time settings
10/30/2021 11:47:43 AM • Hitachi... • Answered on Oct 30, 2021 • 62 views
0helpful
1answer

I have a hitachi tv 50v720 where is lamp light located

Page 56 to 59 of the manual. It is accessed from the front left access panel. You need a philips screwdriver. https://usermanual.wiki/Hitachi/50V720.1133235516 Videos as well https://www.google.com/search?q=change+bulb+50v720+hitachi+tv ..
10/30/2021 1:49:06 AM • Hitachi... • Answered on Oct 30, 2021 • 189 views
0helpful
1answer
0helpful
1answer

My Hitachi TV model no 50HK25T74U a 3 inch vertical line

It's one of 3 things, start by removing the LVDS cable (goes from main board to tcon board) and flat ribbon cables going from tcon board to panel, clean with rubbing alcohol and q tips, replace. The tcon board is the smaller board in the middle bottom of the set, it may have a metal shield over it. If that doesn't help try replacing the tcon board, if that doesn't help your panel is defective and the set isn't worth fixing.
10/14/2021 9:57:08 PM • Hitachi... • Answered on Oct 14, 2021 • 146 views
0helpful
1answer

Hitachi 50 in led tv screen goes black after a few minutes ,still has sound.also has horizontal lines half way up screen

If the backlights stay on when the screen goes dark you could try a new t-con board. Not sure what to say about the horizontal lines, generally those come from a bad panel, that could be causing the screen to go dark as well
10/5/2021 7:08:52 PM • Hitachi... • Answered on Oct 05, 2021 • 183 views
0helpful
2answers

Black Borders

Change the aspect ratio to FULL
9/23/2021 2:17:23 AM • Hitachi 51F500... • Answered on Sep 23, 2021 • 188 views
0helpful
1answer

How can I setup a Goldstone GS-32LCD remote control on my Hitachi fujian TV set box

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. All the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check these sites too. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; as well as online shops. Visit the sites by Desktop computer and type in the brand name of your device in the search box at the right column. It will help you find the remote you have to buy. Mobille view has no search box.
9/14/2021 12:43:12 PM • Hitachi... • Answered on Sep 14, 2021 • 874 views
0helpful
1answer

Hitachi 50hyt62u 50 inch tv black screen with sound

Your LED backlights are bad, but Hitcahi parts can be hard to get sometimes
8/19/2021 10:04:20 PM • Hitachi... • Answered on Aug 19, 2021 • 369 views
0helpful
1answer

The display on my Hitachi DAB radio KH-1150D

I had a similar fault that turned out to be due to a detached soldering connection which connects the display backlight LED to a rather small and fiddly circuit board. It is fairly easy to dismantle this radio to access the display, if you are careful you can DIY, just make a note of any internal wiring you need to 'unplug'. Once you have identified the bad solder you can repair by re-soldering, or replace the LED.
8/13/2021 9:23:43 AM • Hitachi... • Answered on Aug 13, 2021 • 227 views
0helpful
1answer

My Hitachi p508401 plasma TV has no picture I have four blinking fault lights what does the four blinks mean

My Smart TV has that problem too , open it and repair led of LCD
7/16/2021 11:53:48 PM • Hitachi... • Answered on Jul 16, 2021 • 53 views
0helpful
1answer

Closed caption option not highlighted

What is the TV source or input? Unless the source is antenna or cable using the antenna in, the captions have to be disabled at the set-top box that is providing the signal. Some set-top boxes have a CC button on the remote but many have this hidden in the menu system. My IPTV box requires me to press Menu, choose the Settings menu and then enter a code provided by the provider. Once in the menu, the captions are enabled in the Hardware > Audio menu. Some satellite dish set top boxes have different access methods depending on the TV setup. If you have a master box that feeds two TVs, the setting menu to control the closed captions was only available on the TV closest to that box. (This was the case for a Dish receiver with a Single or Dual mode. In single mode, turning on the CC enabled the captions for both TVs. In dual mode, the two TVs could be tuned to different channels but only the TV nearest the set top box would display the closed captions if the feature was enabled. On that receiver, the closed captions were reached by pressing Menu. Then the captions options were under Properties > Closed Captions.) Please indicate what the TV source is for further information on where the sub-menu for the closed captions will be toggled on and off. I hope this helps. Cindy Wells
7/8/2021 11:10:06 PM • Hitachi... • Answered on Jul 08, 2021 • 178 views
0helpful
1answer

Which button do i press to get rid of subtitles on hitachi tv need diagram?

Help my closed caption option is not highlighted how can I remove CC from my Hitachi tv?
7/8/2021 7:30:55 PM • Hitachi... • Answered on Jul 08, 2021 • 7,412 views
0helpful
1answer

Charger light kicks out when plugged in

charger failure
6/30/2021 7:43:15 PM • Hitachi... • Answered on Jun 30, 2021 • 119 views
0helpful
1answer

Model LE49S508 TV. I have a blue screen with volume but no actual picture.

what are you using for the input? cable or antenna
6/4/2021 1:50:31 PM • Hitachi... • Answered on Jun 04, 2021 • 58 views
0helpful
1answer

Model P50h401 TV. Have power and sound. Why no picture?

probably a back light issue
4/23/2021 8:12:45 PM • Hitachi... • Answered on Apr 23, 2021 • 25 views
0helpful
1answer

Hitachi 2110 lamp color is greenish yellow what could it be?

If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter.
3/15/2021 2:40:21 PM • Hitachi... • Answered on Mar 15, 2021 • 38 views
0helpful
1answer

Why won't my 40 inch Hitachi tv not power on

Try resetting the power by switching off the TV and then switch off the TV's power outlet and disconnect the TV's power cable from the outlet. Press and hold the TV's Power button for about 30 seconds to drain any residual power from the TV and then release the button. Turn on the TV in the normal manner and see if it turns on then afterwards.
2/3/2021 8:21:00 AM • Hitachi... • Answered on Feb 03, 2021 • 209 views
Not finding what you are looking for?
Hitachi Logo

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...