HEWLETT-PACKARD LaserJet - Recent Questions, Troubleshooting & Support
My printer had the toner light flashing I replaced
did you replace orginal HP cartridge? if you are change refill or any other kind of manufature cartridge , there is chip is not working properly, that's why ligh is blinking, use orginal HP toner or good quality brand
HP Printer, CP5225, Error message, Right door
This sounds to be a sensor issue. Try:Reconnect the connector (J708) of the 24V interlock switch and the connector(J121X) on the DC controller PCA.Also, try to check the sensor flag of the right door. If it is damaged,replace the right door sensor unit.The sensor worked for me.
HP LASERJET P1606DN goes to offline
Happened on our print server this morning for the first time. We have 4
of 1606dn in our organization. Reset the print spooler and that brought
it out of offline mode
How to replace dc controller board on hp cp5225n
Remove 5 screws from rear cover and remove it
Open the right door to expose 2 screws holding right cover, release tab and remove Right Cover
disconnect 22 cable connections and 6 flat cables from the DC Controller PCB
Disconnect 3 intermediary wire connections and release the cables from the cable guides on the top and right sides
remove 4 screws from the 4 corners of the DC Controller
Remove PCB
Reset count kit fuser
On your Control Panel press the HOME button once
then open
:
Admin
Manage Supplies
Reset Supplies
New Fuser Kit
Then use the Down ARROW to highlight YES then press OK
1606
It needs a new cartridge
49.4c02 error
49.4c.02 error is a firmware error.
Very rarely is a "49" error cause by hardware.
First remove the network or printer cable and reboot. If the printer comes ready the problem is with a print job waiting to be printed. Most likely a PDF file that the printer doesn't understand how to print.
On a windows machine Start, Devices and printers, locate your printer and double click then click on "What's printing" and delete any files waiting to be printer. ( You'll probably see one on the list with the word "error" on the line
Cp5225dn error 59.0240
This error is indicative of a motor not working properly.
Reseat all cartridges and drums and remove and reseat the belt.
I've seen the belt cause all kinds of issues.
Reset menu english CP5225dn
You can change it in the Display Settings Menu. Print a menu map under administration/information to navigate your way
Not finding what you are looking for?