Hayward Recent Questions, Troubleshooting Help & Support

313 Products
14K Answers
493K Views

Brand new Hayward H100ID1 pool heater. All hooked up. Great water flow. Gas turned on. Nothing happens. Followed all instructions. No fan kicking on or even flame.

Hayward Pool &... | Posted on May 27, 2018 | Be the first to answer

Hayward H400 Pool heater will not stay lit

"IF" - Hayward Pool Heater Fails to Ignite: the most common reason for this problem is insufficient gas supply. The Hayward heater LED display will show a diagnostic fault code of "IF" which stands for Ignition Failure. Undetected gas pressure problems if not investigated properly may result in unnecessary replacement and servicing of your Hayward Pool Heater.

Hayward H-series... | Answered on May 18, 2018

1 Answer

My Hayward pool pump is leaking. Can I replace the seal and will that stop the leak.

Replace the seal and see.

Hayward Pool &... | Answered on May 16, 2018

0 Answers

When moving the connector on a Hayward 1HP super pump from 230 to 115, do both gold connectors need to go into the black plug?

Hayward Pool &... | Posted on May 16, 2018 | Be the first to answer

0 Answers

I need a run capacitor for Hayward TriStar Max Rated 2 HP Pool Pump SP3215X20... can't seem to locate correct

Hayward Pool &... | Posted on May 04, 2018 | Be the first to answer

0 Answers

How do I replace the screen on the back of my navigator. It has broke in half and the water gushes in. Would this affect the steering?

Hayward... | Posted on Apr 25, 2018 | Be the first to answer

0 Answers

My hayward cleaner turns to the left only, why?

Hayward Pool &... | Posted on Apr 20, 2018 | Be the first to answer

0 Answers

My hayward navigator twists the suction hose until it can no longer move

Hayward... | Posted on Apr 12, 2018 | Be the first to answer

0 Answers

New Hayward heat pump, pump only runs heat pump 1hp, rated at 80 gpm, had to reduce to 11/2 pvc as that is what comes out of ground and return, cannot get rid of code ps, no filters in line.

Hayward Pool &... | Posted on Apr 10, 2018 | Be the first to answer

1 Answer

I bought my above ground swimming pool package in

I believe that the owners manual has a parts listing to help you distinguish the part that you will need to buy. However, if your pool filter was purchased in 1990, you are probably going to need a new filter. Most do not last over 20 years.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf

Hayward SAND... | Answered on Apr 06, 2018

1 Answer

Hayward pool filter variable speed pump tries to start then stops. Sounds like the impeller is bound up but it spins freely by hand. Any ideas?

motor brushes need to be replaced

Hayward Pool &... | Answered on Mar 17, 2018

0 Answers

Super II Pump 2.0-.33 (two

Sounds like the thermal protector for the motor is tripping. This means there is a problem with the motor overheating.
It is a self resetting switch so when it cools off enough the pump will come back on. It also means you probably need a new pump.

Hayward... | Answered on Feb 10, 2018

0 Answers

Have a wicor model p20

Hayward SAND... | Posted on Feb 03, 2018 | Be the first to answer

2 Answers

Fire fighting pump calculation

One of my well-known company Akshar Technologies working in Same fields related to the Fire Fighting Equipment and fire hydrant system so you contact them and get better advise and answer.

Hayward Sand... | Answered on Jan 16, 2018

0 Answers