Hannspree Computers & Internet - Popular Questions, Answers, Tips & Manuals
Black Screen
The blinking green power indicator means the unit is trying to startup but failing. You can try replacing filter caps in the low voltage power supply.
12/30/2017 9:06:03 PM •
Hannspree...
•
154 views • 0 helpful votes
I have a HF289H An electrical transformer in the
It may have damaged the power supply(PS) and a fuss is possible, but you may not recognize the fuss on the circuit board. Open up the monitor and take a look. Also take the Number down off PS and look-up on line. A used/refurbished PS. eBay a good place to look
12/2/2017 6:06:05 AM •
Hannspree...
•
79 views • 0 helpful votes
Hy all and thankyou for read this! I have a
Go to your run command and enter msconfig and hit enter. then > startup and in the listing of items un check the line that has anything to do with your video card/software.
9/8/2017 1:12:03 AM •
Hannspree...
•
129 views • 0 helpful votes
My 25 was doing fine
Its sounds like the Screen, if its only 6months old take it back to the store for either a replacement or for them to fix
Need manual for Hannspree Monitor Xm-S
When you say the picture keeps dropping, is it going to the black or blue screen where it says it cannot detect an input/source?
If so that could be a faulty cable, if you have a spare cable to connect to whatever the input you're using is it would be worth trying that.
8/16/2016 10:59:41 AM •
Hannspree...
•
183 views • 0 helpful votes
I have a hannsg hg216d monitor and i cannot veiw the right hand side i have tried everything to cure this problem but cannot solve it
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
How do you clear the cache on a hannspree android I pad
Hello and good morning,
To clear the cache of any Android powered device, there are a few ways. The easiest way is to download an app from the Play Store that has been written to clear the system-wide cache. One button press and you're done. Just be wary: some apps and games will reset of lose data if you clear they're caches, so be mindful when using a solution like this.
The other way is to tap SETTINGS, then STORAGE, and clear the cache from individual apps.
Hope this answers your question! For faster, personalized assistance, login to 6ya dotcom today!
4/18/2016 7:48:25 PM •
Hannspree...
•
147 views • 0 helpful votes
Not finding what you are looking for?