Hammacher Schlemmer Audio Players & Recorders - Recent Questions, Troubleshooting & Support

No solution but to return it...very annoying product but yet I like the projected display, very sharp and bright. The replacement was much better, it loses connection with outside transmitter often..but occasionally we see the outside temp

Hold down the + button on front of unit until the time zone moves.Then let go when it reaches the correct time zone.

I suppose you'd have have to mess around with the lens. If you go to hammacher. com, they can help you. This radio has a lifetime warranty, so it's said

you will get any Hinari manual with the manualfox search engine. Check results here:
http://manualfox.com/link/hinari.htm

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.