GE Medical - Popular Questions, Answers, Tips & Manuals

These usually have a button cell battery to hold the time when its powered off. This backup battery is usually found on the back or underside but may also be inside.

GE Medical | 948 views | 1 helpful votes

Make sure your print/record speed is 25mm/sec. Most machines have settings of 50mm/sec or 25mm/sec. I bet yours is set to 50mm/sec. RJ

GE Medical | 1,743 views | 0 helpful votes

If your power line has a two female connection, try unplugging and turning it over ( so the connections are the opposite way around ) plug it back in and try it again, sometimes the current will only flow one way and if it's wrongly connected it will cause the motor to run in reverse.

GE Medical | 1,602 views | 0 helpful votes

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.

GE MAC 1200 EKG... | 1,157 views | 0 helpful votes

Sorry, but we don't send mails. You can download the manual, on the first hit in Google with your words: service manual ge mac 500.
I can't get the link in here, because as soon as I click it, it starts downloading.

GE Medical | 644 views | 1 helpful votes

you can visit this web and you can download service manual for eny devices :

GE Marquette... | 193 views | 0 helpful votes

i have the same problem, i think you should update the softwere

GE Marquette... | 433 views | 0 helpful votes

There will be an MOV (metal oxide varistor) After fuse. This MOV is rated 125v. When you plug the machine in to 220v supply this MOV will become shorted and its blows the fuse to prevent further dameges to the power supply. Replace the MOV and then insert the fuse. I have added the image of MOV here. It is placed parallel to the AC mains supply rail after fuse.



GE Marquette... | 208 views | 1 helpful votes

You have to check the battery of you monitor . If the battery is short then this problem can occur.

GE Marquette... | 270 views | 0 helpful votes

You need to consult the manual, there are multiple printout formats on this machine and it appears that it is looking for data for a print out formation and when it finds none, it skips and then prints again.

GE Medical | 172 views | 1 helpful votes

Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is possible to put the paper in upside down and it will not print on that side. Have you tried to turn the paper around? Good luck

GE Medical | 368 views | 0 helpful votes

remove the AC power. then remove the battery from the machine. reinsall the battery after 15 minutes. then power on. it will be at factory settings. if u need its service manual pls contact me through fixya . for removing battery watch the pictures bellow.


GE Marquette... | 389 views | 0 helpful votes

Hi ,
I'm sending you the manual...Mail me your id to [email protected]


GE Medical | 269 views | 0 helpful votes


The eagle 4000 monitor will not work with three leads.

Take care.

GE Marquette... | 137 views | 0 helpful votes

Not finding what you are looking for?
GE Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top GE Medical Experts


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers


Level 3 Expert

6740 Answers

Are you a GE Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides