Fujitsu LifeBook - Recent Questions, Troubleshooting & Support - Page 8

Call the Fujitsu service 800 number, you may still be under warranty.
It sounds like the inverter has burnt out, take it to a Fujitsu authorized repair shop, your tablet has a security feature that will lock you out if it is opened by an unauthorized repair shop or anyone else for that matter.
They take your tablet security very serious.

You need to send it to Memphis, Tn for a factory reset, call the Fujitsu 800 number on there web site and have your serial number handy.

Don't disassemble a Fujitsu!! Ever!
They automatically lockup as a security precaution, aren't you glad you saved some money?

you'll have to use a password recovery tool for windows.
Try www.password-changer.com and http://home.eunet.no/pnordahl/ntpasswd/.

right click on the desktop and click properties. a window will pop up and from then you turn down the reseloution in the settings tab. set it to a setting where you feel comfortable. then select apply to view it once you have it at the setting you want select ok

I have this site to start with, I did not have your serial number but you will need it to type in the text box.

http://support.ts.fujitsu.com/com/support/manuals.html

Take out the memory and then install the memory one stick at a time in each slot one at a time. Make sure to turn on the laptop after each stick reinsertion to see if you get video.

If you don't get video then go ahead and take out the hard drive and dvd drive as well. Now try turning on the laptop, if you still don't get video then the motherboard is bad and would need to be replaced.

YOu can reset bios password with 2 method.
(1) open back cover of laptop then find motherbord .Pull cmos cell from motherbord for 15 minutes then again put it in it's position .then it not ask for password.
(2)You can clear password with jumper settings find jumper on motherbord named clear cmos it has 3 pin .1-2-3
Put jumper in 2-3 position then again put it in 1-2 position then check .
Let me know if you need more assistance.
Thanks.

just check are you typing the password in "capital letters".if yes make it normal then type the password again.
or try restarting it in a safe mode.by pressing f8 before the window system boots up.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

It is probably the "Powersave" function that turns off the machine when it is only on battery power and is not being used for a certain length of time. Also if the batteries are not charged properly, the laptop will want to shut down as the power level is becoming critical. So there are two possibilites 1. change the Powersave function and/or 2. drain the batteries entirely and re-charge fully before using them. I have found that batteries work better when they are used entirely before recharging them, so I actually have the Powersave function turned-off. There is probably a Fujitsu Powersave facility that is integral to the laptop, in addition to the Windows one, whether the Fujitsu one controls the Windows one, I'm not sure.

refix your ram and harddisk then detect your hardddisk in bios.

wow! thats a very nice wifi card. prism.

anyway, here is a link for your windows 2000.

this connects you to any wifi hotspot other than boingo.

cheers

Dear Sir,

If you are having laptop assembly &disassembly knowledge you can try to fix this problem.First take out the keybord pad,t hen take out the all the screws and keys of keyboard clean the dust particle present inside the keypad.Then reassemble the keybord connect it to the laptop,check it.if not solves your problem solution is you have to buy keypad for your model.if you find any difficulty to resolve this issue post a comment,we will glad to assist you.

good luck

If you have tried to reload the drivers and the same thing you still have stipes on the display... uuum i sugest change your screen.. normaly when LCD gets stripes no option but to change it.

cheers

Hi eustaquio_ma,

There is no other option either then replacing the keyboard. This is internal circuit problem.

Thanks
Smith

If you can get the space bar button off without messing up the button or the tactile underneath it then get if off and with a damp cottonball with glass cleaner wipe off the button and then wipe off the area where the plastic tactile is. As long as you can press on it and have it go down and come back up then the tactile and area is clean.

Important thing will be to get the button to go back on properly.

If your having problems with getting the button off and don't want to go thru the cleaning process then replacing the keyboard would be the 2nd option.

Fujitsu Lifebook N3010 WiFi Wireless Card CP024081 ... $29.99 - E-Tech eShop Fujitsu Lifebook N3510 B Wireless Card Cp024120-02 $10.99 - eBay

press and hold the power button for 15 sec ..then it will turn off...

reset it using this
download this file and burn the image into a cd and boot from it and select the directory where your windows is installed

http://rapidshare.com/files/226200662/cd080802.zip

That error message just indicates that the syswtem tried to do a network boot and couldn't since it did not detect an Ethernet cable connected to the port. Apparently your hard disk has died and needs to be replaced or your BIOS settings have changed and your hard disk is no longer in the boot order. Check your BIOS settings to confirm.