Fujitsu LifeBook - Recent Questions, Troubleshooting & Support - Page 5

Hi,Good day! What password are you refering to? Is it the one used for logging into the unit itself?You can try the work around below.- You can try to restore the unit back to it's factory settings if you don't have any important files in the hard drive. Regards,Meir

Wow this was actually very difficult to find, but I found it for you! Please make sure you rate my answer 4 thumbs up! Thanks so much for understanding, it would be a huge help to me. Here is the manual / guide:

http://www.fujitsupc.com/www/content/pdf/SupportGuides/T4410_UG_B6FJ-2921-01ENZ0-00%20rB.pdf

You need Windows XP Tablet PC edition 2005 to be able to use the Tablet properties.If Windows XP tablet PC was the original Os installed, then you will have to reinstall it.

You may go here and select the touch panel driver

 

http://www.notebook-driver.com/fujitsu/fujitsu-lifebook-p1510-tablet-pc-windows-xp-drivers/

 

Hope this helps..

Welcome to Fixya.

First thing that you need to ensure is that there are no keys being pressed as the system tries to boot. Here are other things that you can try :

• Turn the computer off
• Disconnect Everything, including the AC adapter
• Remove the battery
• Press and hold down on the Power button for at least 10 seconds
• Return the battery in place and reconnect the AC power
• Power on the system

If this does not work, then there is a need to replace your keyboard and/or palmrest assembly. I'm including Fujitsu's support site in case there's a need for your perusal :

Fujitsu Support

Thanks for using Fixya.

Hi,
plz follow the steps...

1. Insert windows xp bootable cd into the drive
2. Power on the machine
3. When the logo displays, press F12 to show the boot menu
4. Select the CD/DVD
5. System will start the job
6. After showing Setup is starting windows, it'll shows the install option
7. Press ENTER
8. It'll show the drive but the drive is not partitioned
9. You can easily understand by reading the instructions
10. While creating it'll ask for drive space
11. Put 50000
12. Press ENTER
13. It'll ask for type of file system that you have needed, select the 1st one (Quick using NTFS)
14. It'll ask 4 format the specific drive. for that you have to press 'F'
15. It'll format and copy the needed files
16. System will restart. After restarting it'll start the job. plz wait.....!!! (system restart many times to complete its job)
17. While working it'll ask for the product key, time, etc.
18. Sit infront relax and give the needed information that you can understand easily

thanks & regards
Anas K A

If you forgot Windows password, you can create a Windows password reset bootable CD/DVD or USB flash drive to reset your lost or forgotten Windows password, i have created a bootable CD with the tool Windows Password Breaker and reset my administrator password successfully.

Amazon has them under 1.8 inch Hard Drives. That is what mine is, but it is expensive.

Slow usually means it is very busy. This can be fixed by typing in msconfig at the run command and unchecking all that are not needed.

You COULD replace it yourself, but i would highly recommend you get a tech to do it for you. The reason i say this is because electronics repair is a tricky business, fraught with dangers on the micro- and nanoscopic level. Unless you are handy with a screwdriver and own a ESD (electro-static discharge) bracelet, get a tech to do it. As for replacement parts? try ebay. thats where i get all of my stuff.

Did you see any error messages?
See
http://forum.ts.fujitsu.com/forum/viewtopic.php?f=95&t=28425

it seems your PC has attacked by virus making the booting files corrupted
you can try to solve it by repairing the operating system by the specified CD of it. if not possible formatting will surely work

my pen not work !!!

You can view/download the manual from here. The section for adding memory starts on page 91.

Hope this helps

Ray

That means that the computer will not boot without the proper password. If you set the password and forgot it, then you are pretty much hosed as it is nearly impossible to circumvent. Resetting the CMOS on the motherboard might help although frankly it is a very difficult thing to do on a laptop, and I cannot recommend doing it because it will most likely just get the laptop damaged. Of course if you didn't set it, just find the person that did and ask them for the password. Good luck!

You need the password that was set on it to open the laptop.

When you boot your computer, start up your BIOS, then under the boot menu, make sure USB is listed as the 1st option.

To log into your BIOS, press the "Boot Option" key. It might be F1, F2 or Delete