Fuji (MAP3367NP)... | Answered on Nov 26, 2015
Fuji Okuma Lc 10... | Answered on May 04, 2015
Fujifilm 32 GB... | Answered on Mar 07, 2014
Fujitsu Siemens... | Answered on Nov 24, 2013
Fuji (MAP3367NP)... | Answered on Aug 01, 2013
Fuji (MAP3367NP)... | Answered on Feb 02, 2013
Dry the flash drive as much as possible with a piece of paper towel to absorb excess moisture.
Gently pry open the case of the flash drive if possible, using a small flat-blade screwdriver to separate the two halves of the case.
This is not essential, but will cut the drying time and will help to limit corrosion.
Dry the inside of the case as much as possible with the paper towel.
Pour some uncooked rice into a small plastic bag, and then place the flash drive in the bag and seal.
Place the bag in a warm, dry place for at least 24-hours.
The rice draws out and absorbs any moisture present, speeding up the drying time and ensuring the drive is completely dry.
Check the drive after 24 hours.
If you can see any moisture, leave the board for 24 hours and repeat until the board is completely dry.
Reassemble the case, ensuring the two halves are tight shut. Use a small spot of glue to hold the two halves together securely if necessary.
You can then use the flash drive as normal.
hope this helps
Fuji (MAP3367NP)... | Answered on Sep 16, 2012
99 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: