Fuji Logo

Fuji Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 891 Products
  • 53K Answers
  • 1M Views

Does the screen work in menu mode or playback? If so then the shutter may be stuck in the closed position. Compact and bridge cameras work on "live view". The picture is live feed from the lens. Obstruction to the sensor (usually the shutter) will prevent live view.

Fujifilm Finepix... | Answered on May 19, 2020


Yes. Remove the memory card and connect it to your computer. Then search the internet for a file retrieval software.

Fuji Finepix... | Answered on May 19, 2020


CHECK WITH THE MANUFACTURER WE KNOW NOT FUJI'S ERROR CODES SUGGEST YOU ASK GOOGLE

Fuji Cameras | Answered on May 10, 2020


I have been using a bit of edge sharpening lately in combination with smaller & smaller amounts of overall USM. I know Thom Hogan's CD for the S2 had his version as a PS Action and there are others that do the same around. I eventually made my own custom action for it. Can be used most effectively to sharpen an image while leaving noisy areas alone.

Fuji FinePix S3... | Answered on May 09, 2020


Hi,
I am afraid that there is only a small percentage of luck that your camera isn't destroyed. If it was in the bag with the wine for a long time then the wine certainly went into the camera circuits.
What you can do is take it to an electronics service shop and ask them if they could open it, remove the components and clean them with special solutions to remove the sticky wine.
Hope it works.

Fuji FinePix... | Answered on Mar 06, 2020


Jerky play back on a PC is determined by a few things. Video card memory, RAM, CPU processor speed, and *codec*. VLC has it's own codec so does not rely on the ones supplied by Windows. If even VLC is playing it back choppy, try lowering the video resolution. It may be too high for the video card to handle.

Perhaps you don't have enough RAM to run the file at it's full resolution. Reduce background tasks or close them using the task manager. Upgrade your video card, add more RAM. If you can't add RAM or a video card - either reduce the resolution setting on the camera for next time, or use the HDMI port on the camera to directly playback video to a HDMI device.

*codec* - "A codec is a device or computer program capable of encoding or decoding a digitaldata stream or signal" - Wiki

Fujifilm FinePix... | Answered on Feb 20, 2020


The error appears when the device does not respond to the software. Try rebooting the device and updating again. Here there is a guide to reboot your device: http://support.microsoft.com/kb/940705#C00D124D.

Fuji FinePix... | Answered on Jan 28, 2020


My Instax 7s won’t take any pictures only make a click noise goes blank then The red lights starts blinking I have brand new batteries and new film in what else should I do ?

Fuji instax mini... | Answered on Dec 26, 2019


Sounds interesting - what does it mean ?

Fuji Cameras | Answered on Dec 24, 2019


Switch off and after 5 minutes switch it on

Fuji Reflector... | Answered on Nov 21, 2019


SOURCE:Fujitsu fi 5120c e2 error
See page 25 of:
http://193.128.183.41/support/scanner/manuals/fi-5120c_gs_p3pc-1312-01en.pdf
"E2" is "Trouble with the optical system (front)."
That doesn't solve your problem, but at least it narrow downs the focus of your problem.

Fuji Office... | Answered on Oct 14, 2019


If connected via USB, unplug cable and insert into another available port and error message may disappear.

Fuji Office... | Answered on Sep 27, 2019


Try a picture recovery program. This one has a good reputation.
http://www.asoftech.com/apr/

Fuji FinePix... | Answered on Sep 23, 2019


Follow the "instructions" in the "manual"

Fuji Cameras | Answered on Sep 19, 2019


You're right. Formatting in-camera will only reset the two File Allocation Tables, which act as a pointer to where the data really resides. The data (pictures) should remain safe until they are overwritten (the File Allocation Tables will have been marked to show their positions as being overwriteable). There are lots of solutions, the most expensive, is to send the card to a data recovery place (I don't know from your profile, where you are, but Fuji UK has a very good data recovery department, for just such a problem). Another way, is to use data recovery software. These, on the whole, work very well, and vary in price from zero, to a few hundred bucks. I've found little difference in quality between them. However, the easiest and currently most popular, seems to be F-Recovery... http://www.filerecoverytools.com/products/fr_smartmedia/ It is no better than most of the freeware tools out there, it's just easier for a novice to follow.

Fuji FinePix... | Answered on Sep 19, 2019


Dear Deemax1,
There are hundreds of software available on internet to convert avi to wmv or to any other file format. I searched Google with "avi to wmv converter" and I received about 5,250,000 results. Please download any free software and that should do the trick.

Hope that helps. Please let me know in case any further assistance is required.

Regards,
Srinivas.

Fuji FinePix... | Answered on Sep 17, 2019


OK SANDISK is just a brand name, you have to use a XD card, sandisk makes xd cards along with other brands as well....

Fuji FinePix... | Answered on Aug 25, 2019


My camera stays open, will not shut, and when I turn it on the screen says "zoom error" and then turns off again

Fuji FinePix... | Answered on Aug 25, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fuji Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Fuji Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...