Frymaster Dean Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support


cheaper to get them made by local sheet metal shop

Frymaster Dean... | Answered on Mar 26, 2019


If you are leaking oil by one of the burner tubes you can replace the tank or get a new fryer. new tanks usually cost around 400 plus installation. Usually better to replace the fryer.
Tom

Frymaster Dean... | Answered on Mar 07, 2019


http://www.partstown.com/frymaster/parts#search-tab-content=manuals-and-diagrams
without model number, I can only talk generically. This sounds like the high limit is open and needs to be reset. The partstown website I attached should take you to where you can find your manual and this should help you fix it.

Frymaster Dean... | Answered on Sep 24, 2017


I recommend that you get in touch with the company. Or the 1 800 number in the instruction handbook. Or Google by the name of the company. They may correct the problem.

Frymaster Dean... | Answered on Sep 21, 2017


you may check your solinoid if is properly supplied. if equiped with other safety limiter have it checked for example. drain swithces hi limit thermostat float switch some of this may not work properly.

Frymaster Dean... | Answered on Jun 14, 2016


A orange flame means that not enough air is mixing with the gas to produce a nice clean burning blue flame. Try cleaning out any deposits of grease or anything else that could be blocking the air pathway to the flame.

Frymaster Dean... | Answered on May 09, 2016


Thermocouple is getting weak. Replace the thermocouple with a new part.

Frymaster Dean... | Answered on Aug 29, 2015


The pilot light should remain "ON" all the time. It is not intended to ever go off, unless you are not going to use the fryer for several months at a time. Then you can just shut off the propane which will shut off the pilot light flame. It does not cost that much to run the pilot light all the time. About one to two dollars a week.

Frymaster Dean... | Answered on Aug 29, 2015


The metal coil that is very close to the mercury switch is worn out and weak after many times of use.

Frymaster Dean... | Answered on Aug 29, 2015


Make sure the thermocouple is deeper into the flame of the pilot light. It needs to reach a high enough temperature to produce a high enough voltage to keep the pilot light lit all the time. I do not think that the main gas valve is bad at all.

Frymaster Dean... | Answered on Aug 29, 2015


Defective thermocouple.

Frymaster Dean... | Answered on Aug 29, 2015


There is none.

Frymaster Dean... | Answered on Aug 29, 2015


Defective thermocouple. It is the metal tube that is in the flame of the pilot light.

Frymaster Dean... | Answered on Aug 29, 2015


Defective thermocouple. It is the metal tube that is in the flame of the pilot light.

Frymaster Dean... | Answered on Aug 29, 2015


The gas valve may be leaking gas out where it should not be leaking gas out. You may need a new gas valve. This could be a safety issue, not just with a fire, but a potential fire gas explosion. Please get it fixed ASAP.

Frymaster Dean... | Answered on Aug 29, 2015


There is no repair to fix the leaking gas valve other than to replace the gas valve with a brand new one.

Frymaster Dean... | Answered on Aug 29, 2015

Not finding what you are looking for?
Frymaster Dean Logo

223 questions posted

Ask a Question

Usually answered in minutes!

Top Frymaster Dean Kitchen Appliances - Others Experts

Paul Carew

Level 3 Expert

3534 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Dennis Boxerman

Level 3 Expert

1305 Answers

Are you a Frymaster Dean Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...