My Frigidaire gallery fridge not cooling at all
Are you calling the compressor condenser? My gallery side by side stopped cooling the refrigerator side and it was the control board under the refrigerator side. Also, just because the control board is new does not guarantee it is good. There are a lot of youtube videos on trouble shooting the Gallery. You might not have plugged in all the connectors when you changed the board, or maybe bent some pins.
10/6/2021 6:33:48 AM •
Frigidaire...
•
134 views • 0 helpful votes
My Frigidaire oven FGGF3058RFD lost all power after a self clean. the door is still locked, no display and igniters for cook tops don't work.
Yes, never ever use the self clean function on modern ovens. 880-900 degrees to too aggressive. We see ovens broken here all the time, doors locks broken, wiring burnt, elements burned out, control boards frazzled, fans seized.
You need a service call. There is no thermal fuse for obvious reasons, it's an oven.
Self-Clean Ovens
The oven is cleaned by heat, at temperatures above normal cooking temperatures. During the cleaning cycle the oven is heated to about 880 degrees Fahrenheit (471° C.). At this temperature, food soils inside the oven decompose, leaving behind a small amount of ash.
Buy a can of Easy-Off, or use household ammonia. If panels are removable, you can put the parts and the ammonia into a black garbage bag overnight.
11/16/2021 7:15:25 PM •
Frigidaire...
•
44 views • 0 helpful votes
I can't get the "loc" display to reset from my Frigidaire gallery dishwasher
Try pressing and holding the Delay Start button for ~3 seconds. The 'loc' indicator should go out. If you hold the button for too long, then the lock could toggle back on. If the problem persists, you may have an issue with the keypad on the dishwasher.
I hope this helps. Please add a comment with the model number of the dishwasher if the control panel lock does not disengage.
Cindy Wells
7/9/2021 7:38:19 PM •
Frigidaire...
•
448 views • 0 helpful votes
How do I repair a washing machine?
Common solutions for: Frigidaire Washer won't spin or agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If the lid switch assembly fails, the washer will not spin.
9/10/2021 12:01:26 AM •
Frigidaire...
•
81 views • 1 helpful votes
Can't change temperature on AC
thats normal its showing ambient when you lower it the number will change to the setting and then will go back to show what the ambient temp as the room gets cooler the temp number will go down and shut off at set temp
6/30/2021 2:06:22 PM •
Frigidaire...
•
529 views • 1 helpful votes
Not finding what you are looking for?