Frigidaire Dryers - Page 6 - Recent Questions, Troubleshooting & Support
E68 readout on the panel
frigidaire dryers have problems with the computer boards,i've seen the affinity dryer start by itself,it will start to beep and then i can start up,but that error is telling you one of the buttons are stuck,if all the buttons check good you have a bad computer board.hope this helps you out.
Frigidaire gallery dryer making loud thumping noise
IF you have an uneven load this can happen, If the dryer has shifted in position and is no longer LEVEL or the feet have changed their distance leaving a gap or open space. The dryer can also move from vibration and be leaning against a wall or the washer next to it. Check that first, and if none of the above, then the drum may be misaligned. A belt could stretch. The shaft of the drum fits into a connecting part that may be worn and out of round or bearings are worn.
Frigidaire affinity dryer wont run cycle it resets
Not 100% but there should be a way to reset computer using the controls on the dryer.
If you have the manual it should be in there or contact the manufacture you could get lucky they may tell you.
Regards Craig
Start/stop lights are flashing with "50" minutes readout. should be OFF. how do I clear it for good?
these dryers have alot of board problems i've seen them beep and then start up by themselves gotta love frigidaire,the computer board took the place of the timer so if the dryer didn't advance to off and got stuck in the same spot you knew it was the timer,so if it doesn't count down and beeps it sounds like a board issue and sometimes the board can't read itself out and you won't get a code.try unplugging it for like 5 to 10 minutes and then plug it back in to see if it resets the board but it probably will go back to doing the same thing
My frigidaire affinity dryer displays LOC
Hi,
"LOC" indicates that the control panel settings are locked. Press the SELECT and OPTION button simultaneously to toggle this 'feature' on or off. Hope this helps.
Not finding what you are looking for?