Fluke Networks Recent Questions, Troubleshooting Help & Support

Linkwarehttp://www.flukenetworks.com/support/downloads/50006/OMNIScanner%2BSeries

There is an issue with your Dc measurements board. Contact [email protected]

This means there is an issue with the DC measurements board. Contact [email protected]

https://www.baldengineer.com/wp-content/uploads/2016/12/22-168a-owners-manual.pdf

Distributed exclusively in the U.S. by Orbyx Electronics, LLC 501 South Cheryl Lane, Walnut, CA 91789 Orbyx TOLL FREE at 1-866-363-3059 Imported in Canada for/Import? au Canada pour Orbyx Electronics, Concord, Canada, L4K 4M3

check and clean switch connections

its a punchdown tool - if you need instructions than you should get someone to show you first https://www.wikihow.com/Use-a-Punch-Down-Tool

check battery and also chexk that power adapter is working

How to Put Batteries in Fluke 1AC Voltage Detector How to Test the...

this model does not have that option

\ https://cdn.shopify.com/s/files/1/1723/4673/files/Robin_SmartPAT3000_Manual.pdf?2901109058745133524

a. Connect test leads to the + and COMMON terminals. b. Turn the function selection switch to the DC OHMS position. c. Turn the range selector switch to the 200mV position. d. Short the test leads together. e. Allow the instrument to warm up for 15 minutes. f. Using an insulated screwdriver, adjust the potentiometer through the hole located directly below the analog display for a numerical display of 00.0. http://www.simpson260.com/downloads/simpson_360-2_user_manual-1975.pdf

send back to Fluke for repair

check battery

https://www.youtube.com/watch?v=VDlkaP21n4U

?????

http://www.produktinfo.conrad.com/datenblaetter/100000-124999/124603-an-01-ml-VOLTCRAFT_VC_870_DMM_de_en_fr_nl.pdf

Check the internal fuse - usually there for amperage readings.

try checking connection of battery terminals to main board (you may need to bend them a little to make sure they touch main board once closed).

Error 1 is an indication that the self test has failed. This will require repair at an authorized Fluke service center. There is an internal problem with the meter. The only thing that you can try is to replace the internal battery. Should the battery be defective, the internal testing can be effected. I have only seen this occur once, but it is worth the attempt. Should a new battery not fix the problem, return the meter to Fluke for repair.

Dan