I need a seat roller for a carl lewis rowing
Most rowing machines can be stored vertically to take up less floorspace. This is also where the caster wheels can come in handy to help you move the rower to a corner, nook or cupboard, and the folding nature of some rowers like the Concept 2 can be helpful for storage in a small space.
Fitness quest edge 491r computer panel works for a short period of time when i put new batteries in it however no matter what I do I can not get the resistance to work. Please advise.
If you're experiencing issues with the computer panel and resistance on your Fitness Quest Edge 491r exercise bike, here are a few troubleshooting steps you can try:
- Check Battery Contacts: Make sure the battery contacts within the computer panel are clean and free from corrosion. Dirty contacts can interfere with proper electrical connections. Clean the contacts if necessary.
- Proper Battery Installation: Ensure that the batteries are installed correctly, with the correct polarity (+ and -) aligned according to the markings in the battery compartment.
- Reset the Computer: Sometimes, resetting the computer panel can help resolve issues. This might involve removing the batteries, waiting for a minute or so, and then reinstalling the batteries.
- Check Wiring and Connections: If there are visible wires connecting the computer panel to the resistance mechanism, make sure they are securely connected and not damaged.
- Calibration: Some exercise equipment requires calibration after battery replacement. Check your user manual to see if your Fitness Quest Edge 491r requires any calibration steps after changing batteries.
- Sensor Alignment: There might be a sensor that reads the resistance level. Make sure it's properly aligned and not obstructed by anything.
- Contact Customer Support: If none of the above steps work, it's advisable to contact Fitness Quest customer support. They might be able to provide specific troubleshooting steps or suggest further actions.
- Professional Assistance: If you're not comfortable performing troubleshooting yourself, consider seeking assistance from a professional technician who specializes in fitness equipment repairs.
I have snapped the bands
The bands are not meant to be replaced. You're at maximum beast mode for this piece of equipment as indicated by its total destruction. Revel in the glory of your monster abs.
Good afternoon I have misplaced
loads on ebay https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2055119.m570.l1313.TR0.TRC0.H0.XEclipse+1100+power.TRS0&_nkw=Eclipse+1100+power&_sacat=0
My eclipse 1100 hour monitor is not working
Check it out. If you machine monitor shows and e-1 when trying to turn on. Take out the batteries and unscrew the four screws on the bottom of the monitor unplug it from the elliptical. Put the batteries back in turn on monitor the plug it back to the elliptical while still on and screw back in places. It worked for me hope it works for you too. Brian Pickens Long beach ca
I need the electrical connector part for this machine.
What do you mean by "electrical connector?" You do have the console, right? Is it installed and connected?
Do you mean the power supply block which connects to a wall outlet, instead? Actually, power blocks may prove a problem: Which ones go with which items?! (Often, they're marked with weird PRC or other brand names, etc.) The connector for the plug and wire for the block is at the rear, bottom of the base.
I may look at mine, find the voltage and amperage needed, and direct you to the type of alternative power supply to order--from amazon, ebay, etc. It's great that online-purchase saves the day for this type of problem--these days!
Edge 491 exercise bike monitor panel dead
http://www.academy.com/images/pdf/Fitness_Quest/Edge_Recumbent_Bike_491r.pdf
Mine went dead last Spring. I ordered a replacement part from Fitness Quest. I think the link is above. Actually, while I was waiting for the part, I reconnected all the wires on the whole bike and the panel worked. So I actually have an extra new working panel if Fitness Quest doesn't have the part for some reason and u want mine. Double check ALL the connections of the wires first. They come loose easily.
Nancy
Not finding what you are looking for?