Fisher and Paykel Washing Machines - Page 8 - Answered Questions & Fixed Issues

one of the suspension rods is eith not attached or broken

replace the cold water solenoid

no you cant the bowl just hangs in them, if it keeps going out of balance put a new set of suspension rods in

if your good with your hands they are the easist machine ever to do them on

there is a lid switch located under the top of the machine on the right hand side activated by a magnet in the lid this is probable faulty

blocked or faulty pump

the switch is faulty replace the switch

this code indicates a faulty main board

this code imeans a faulty rotary position sensor and easy fix

the cold solenoid is faulty

do you mean fuse ? if so its on the main computer board

as this fault doesnt exist i would say the main board is faulty

most likely a faulty pump try tht first

easy as remove cap off the top of the agitator,inside at the bottom there is aa wing nut undo anticlosewise and remove agitator

its one of tricky ones,because its one of two faults, both are board faults question is which one so you need two replce and try it if tht doent work replace the other one

this is a fault code 43 which mean the out of balance switch is either faulty or the switch isstuck in the on positionfree up or replace switch which is located just under the main board

faulty cold water solenoid replace with new one

top loader yes remove cap off top of agitator there is a plastic wing nut at the bottom undo anticlockwise and agitator canbe removed and replacement

the is actuallt a special spanner for it which is now unavailable

you have a faulty pump do not use until you replace it