Fisher and Paykel Washing Machines - Page 6 - Recent Questions, Troubleshooting & Support


Sometimes things can get out of sync. Try unplugging the machine for a few hours to rest the code on the board.

Fisher and... • Answered on May 10, 2018


15.5 Size Setting If a new motor control module is fitted, the size switch settings will have to be set in the memory. To size set a L.C.D AquaSmartâ„¢ machine: 1. Press and hold the left SCROLL button, then press the HIGH EFFICIENCY button until two beeps are heard. 2. Press the SCROLL button to select the machine size (600 for WL70, 650 for WL80). 3. Press the POWER button.

Fisher and... • Answered on May 06, 2018


All replaced electronic boards need resizing. Going by your post your have an AquaSmart machine Here are some details to resize an AquaSmart machine 24903416-ei0rt0v231vo43kgyqwiblfx-4-1.jpg

Fisher and... • Answered on May 02, 2018


removing bowl is the best way

Fisher and... • Answered on Apr 21, 2018


you can buy lint filters from f&p but your main problem is caused by something like a tissue or something like that disintergrating inside ur machine best thing to do is remove inner bowl and thougherly clean both

Fisher and... • Answered on Apr 21, 2018


you will need to remove the inner bowl and clean it all

Fisher and... • Answered on Apr 21, 2018


did you wheck the windings on the pump if they are discoloured in any way replace it they get hot smelly and then blow the main board

Fisher and... • Answered on Apr 21, 2018


check pump for burnt windings,if good faulty main computer board

Fisher and... • Answered on Apr 21, 2018


its probably the rotary position sensor,it would help if i knes what lights are on at the time

Fisher and... • Answered on Apr 21, 2018


make sure yourhot and cold taps are on even when on a cold wash and see how you go

Fisher and... • Answered on Apr 21, 2018


check drain pump for burning smell sniff it or and discolouration of the copper windings

Fisher and... • Answered on Apr 21, 2018


i need to know which lights are lit up

Fisher and... • Answered on Apr 21, 2018


blocked ,jammed or fulty drain pump

Fisher and... • Answered on Apr 21, 2018


under the top of the machine on the right there is a reed switch which is actic=vated by a magnet in the lid remove the two bungs and screws so you can lift the top up a bit and you will see it there one screw to remove it if its corroded or swollen its faulty either repace it or as a easy fix cut both wires off it and join them together and tape up, this should do it

Fisher and... • Answered on Apr 21, 2018


if it keeps filling until it floods the it has afaulty transducing which is locatedin the mainboard which will have to be replace

Fisher and... • Answered on Apr 21, 2018


if you didnt run the pump on the bench dont be fooled by any readings it canstill be stuffed

Fisher and... • Answered on Apr 21, 2018

Not finding what you are looking for?
Fisher and Paykel Logo

4,249 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...