Fisher Dishwashers - Page 2 - Recent Questions, Troubleshooting & Support
My dishwasher keeps flashing F1 error message
The f1 code is caused moisture in the electronics part most likely in the door.see if there is any way that you can see where moisture might get in and plug that spot up. In the case of the f1 code when not using the dishwasher leave the door propped open to help dry out the electronics.
10/22/2017 8:15:29 AM •
on Oct 22, 2017
What is f1
Means that there is water in the base pan below the bottom drawer.
6/13/2017 9:30:56 PM •
on Jun 13, 2017
When we turn the garbage disposal on the water backs up into the fisher Paykel dishwasher. What do we need to do to fix this?
Replumb the outlet for the dishwasher into a different drainpipe. The installer put your dishwasher outlet onto your garbage grinder outlet.
If there is only one drain pipe under your sink then things get difficult.
You can try to lift the outlet hose from the washing machine a little bit but that might cause problems in your dishwasher.
A backflow valve on your dishwasher outlet might work if there is one available.
Check you drain is not blocked slighty (highly likely with a garbage disposal) and causing back pressure. Draino; Boiling Hot water; bicarb and vinegar,
Was it working properly a while ago?
4/7/2017 2:46:00 AM •
on Apr 07, 2017
Not finding what you are looking for?