Fisher Dishwashers - Recent Questions, Troubleshooting & Support

0helpful
1answer
0helpful
1answer

2 drawers fisher n Pykel dishwasher top stuck on rinse. Tried cleaning the control and unplugged. How to open the panel and instruction how to swap the censor to find the problem..

What model? do a Google search for the service manual for your machine, it will detail how to access the service and testing part of the machine.
2/8/2022 1:52:08 AM • Fisher... • Answered on Feb 08, 2022
0helpful
2answers

Top drawer of DD60DCX7 Fisher Paykel DishDrawer won't drain properly.

https://www.youtube.com/watch?v=kocA5kOA70I&list=PLphk3KpL9obhu4A1EytgMnE9tZJXi2Yfl&index=12&t=0s https://www.hunker.com/12160071/how-to-unclog-a-fisher-paykel-dishdrawer-drain
4/18/2020 11:21:15 AM • Fisher... • Answered on Apr 18, 2020
0helpful
1answer
0helpful
1answer

F2 error code on a Fisher & Paykel dishdrawer DS605. We have replaced the rotor motor with a new one, but the error code will not go away. Drainage hose was also split and has been replaced.

Hi Dan-I found this link.https://www.fisherpaykel.com/vault/pdfs/pdf_usecares/599864A_DD60_userguide_CN(EN).pdfIf you are looking to reset the error code. On page 28 "Fault Codes", it talks about "How to attend to a fault code".Hope this helps.I also found this youtube video on Fisher & Paykel dishwasher repairs.https://www.youtube.com/playlist?list=PLLkJYbdOr3lovxlEUZUJRSzBKsA2-6giDHope this helps.
11/29/2019 1:41:39 PM • Fisher... • Answered on Nov 29, 2019
0helpful
1answer

I have a Fisher paykel late model Dwk60 dishwasher, that keeps getting the error code E30, flood switch activated with the alarm and won't reset, I found online that you tilt the machine backwards

You have to turn the power off, clean that cesspool drain area thoroughly, dry all around the door seal, and tip dishwasher backwards. Then the flood switch resets and the E30 error disappeared for me.
7/1/2019 6:32:30 AM • Fisher... • Answered on Jul 01, 2019
0helpful
1answer

So i have a fisher pykal double drawer dishwasher. The top drawer doesnt work. Still has power...but doesnt make the chime when u pull it open. No code is being trown. Doesnt start gives a chime that says...to bad...help

Although I'm not familiar with this model, it sounds like a switch is stuck or misaligned. With most electronic things, there's a physical toggle switch (sometimes 2 magnetic points, similar to a window security system) located somewhere along the drawers tracks or latch or at the back. Try to find it and see if it still freely moves. If it does than most likely the switch has failed and needs replacement. Hope this helps and good luck!
1/11/2019 1:28:31 PM • Fisher... • Answered on Jan 11, 2019
0helpful
1answer

Hi, how do I fix error code F1 of a fisher & paykel draw dishwasher??

The F1 error on a Fisher and Paykel dishwasher means the flood switch was activated for seven seconds or longer. ... The dishwasher's flood switch could activate because the water is leaking around the heater plate. It would still eventually show up somewhere, though a leak like that would kill the heater plate too.
11/5/2018 12:49:46 AM • Fisher... • Answered on Nov 05, 2018
0helpful
1answer

Fisher & Paykel Dishwasher Model 920 has controller 521793p - tripping outside meter board circuit breaker after it has been operating for only a couple of minutes. ?? replace/repair module?

maybe circuit breakers trip from excessive current and poor insulation or moisture around electrical contacts call in an electrician to test the unit first and then repair / replace what is found to be faulty remember that the power point for the unit may also be on the house circuit that is having a problem unit somewhere else that is causing the fault
10/3/2018 5:16:36 AM • Fisher... • Answered on Oct 03, 2018
0helpful
1answer

Fisher packed dishwasher dd603

If the panel display on the lower drawer is lit and you can select the program then most likely the water inlet valve is fault and needs replacement. But if the panel is dark and none of the buttons operate then the power to the drawer is cut off. This can be due to a number of reasons including the power board at the base loosing one power circuit or the thermal fuse in the drawer is blown. Please provide model number of dishdrawer unit and also please describe what is actually happening.
3/7/2018 12:43:19 AM • Fisher... • Answered on Mar 07, 2018
0helpful
1answer

Service manual for 913T dishwasher

Do You want a Service Manual or a User Manual. Both are for different purpose.Please let me know your email id to send Service Manual.
1/21/2018 6:27:14 AM • Fisher... • Answered on Jan 21, 2018
Not finding what you are looking for?
Fisher Logo

166 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher Dishwashers Experts

NOEL
NOEL

Level 3 Expert

8603 Answers

john h

Level 3 Expert

28111 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

53113 Answers

Are you a Fisher Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...