Eureka Vacuums - Page 4 - Recent Questions, Troubleshooting & Support

Use compressed air.

Swivel the collar at the smaller end where it attaches to the vacuum which will allow the clear plastic cover to come off which will allow you to pull out the brushroll and belt to replace it. Reverse to reassemble.

Most likely it is clogged with lime or rust

Parts are available at Sears, so contact them to see if manual can be provided. https://www.searspartsdirect.com/model-number/7679bt/1281/0645000.html Online chat or telephone: for questions or assistance, call888.873.3829(Se Habla Espa?ol) M-F 6:30 a.m. - 10:00 p.m. CT Sat 7:00 a.m. - 9:00 p.m. CT Sun 7:30 a.m. - 9:00 p.m. CT

fixya doesnt sell products

It comes with a 500cc measuring cup.

GO to Google and search for: "eureka vacuum belts" ADD your model number as you do. A

It is most likely a switch or loose wire or connection in the switch or handle.

It's likely reset has gone bad, The thermal reset is built into the motor. If the reset is bad the only way to fix it is to replace the motor.

Ivan say for sure without knowing your model number but it most likely does not have a reset button. Most have a thermal reset belt into he motor because it's cheaper than putting on a reset button.

Inspect the handle release pedal and pivot and where it latches on the vacuum body to see if something is broken, loose or missing. Inspect the on off switch pedal assembly, the switch and spring to see if something is malfunctioning, broken or missing. Contact me at [email protected] if you find you need any parts.