ESQ Watches - Recent Questions, Troubleshooting & Support

https://www.youtube.com/watch?v=GuSiLhiCLDE https://www.youtube.com/watch?v=2QWt9pgsfA4 https://www.youtube.com/watch?v=TEcP0ZSnVmw

Here where we live we have a store that replaces watch batteries. I took mine in and he took the back off and took the old battery out and went to his battery stock and replaced it for me. He did all the work and only charged me three dollars. He has batteries for all makes.

1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Sorry we have no information on parts nor do we sell parts.

go to a jeweler or watch maker as they often have spare links from bands they adjust in shop when making a sale take the watch in to match the links

you need to go to a jewelry place, or walmart, you need a special tool called linkage removal tool. it has one job and only one job and thats all it does removes pins and reinstalls pins it is a very small press, the shaft of the press is about 1/64 inch