My Epson TX110 wont recognise
you should wipe and clean the copper contact to where the terminals inside the printer touches. Use a clean clothe moistened with alcohol for cleaning.
If the red light is still
on the printer, and Status Monitor indicates that an ink cartridge is not recognised, follow the steps below:
- Power the printer OFF.
- Disconnect the power lead for 60 seconds.
- Reconnect the power lead. Do not power the printer on yet.
- Perform a printer operation check.
I refilled empty ink cartridges
If you refilled these yourself you will need to go to google.com and serach how to make refill cartridges work on epson stylus NX400 there is a little computer chip that tells when the cartridge is empty you will have to disable this before it will work
How to refit the epson scan printer cartridge
Turn on your printer and open the top cover (not just the scanner lid) and press the maintenance button (the little paper icon with a drop) and wait for the head to move into the maintenance position. Now lift the ink cartridge clamp to expose the ink cartridge and carefully lift the old cartridge out. Now open the new cartridge and remove the yellow strip, but however do not touch the green tab, now insert the new cartridge with the green tab facing toward the front of the printer. Now close the clamp and re press the maintenance button and wait for the printer to recognise the new ink cartridge (30 secs.) And you are finished.
Thanks,
Ash.
My printerhead is clogged
You will have to be careful and precise.
Using a needle or other suction product.
Extract some ammonia int it.
Let the printer move the head to center.
Unplug unit.
Take syringe and place a few drops into where the cartridge hole would have lined up
Be carefull not to OVERFILL head.
Install cartridges and let printer sit for an hour or so.
.
Power back on and let the machine do a self clean.Should be good to go.
Paper jam error
Open the access door, move the carriage if necessary, and then remove any jammed paper. On some Laserjet printers, you might need to remove the toner cartridge and/or imaging drum to access the paper jam. If your printer has a paper path cover behind the carriage, remove the cover, and then remove any jammed paper
Regards,
Will
Epson R265 paper feed problem
Paper feeder problem. You must open case and paper feeder.Check for all screw. spring, rubber and lubrication. If you never done, find diagram at printersiam.com. is printer paper jam berfore? and clearing jam by pulling paper form back?
I can't get the printer to cancel ajob
Cancel printing from Windows
On the Windows taskbar, at the bottom-right corner of the screen, right-click the Printer icon. ...
Select Open All Active Printers.
In the Active Printers dialog box, select the printer you want.
In the printer dialog box, select the print job you want to cancel.
Click Document > Cancel.
Regards,
Will
I cant get it into print mode... I made a copy and
Check Your Printer's Error Lights.
Clear the Printer Queue.
Solidify the Connection.
Ensure You Have the Right printer.
Install the Drivers and Software.
Add Printer.
Check That the Paper Tray Is Full (Not Jammed)
Fiddle With the Ink Cartridges.
Regards,
Will
How to change the cartridge
turn off the printer power supply, in some printer wen power is off the cardridge head becomes free and it can be moved.
HOW TO CHANGE INK CARTRIDGE
Hello Doca,
Please visit the link provided below to replace the cartridge :
http://files.support.epson.com/pdf/nx400_/nx400_qr.pdf
My printer is not printing
Check Your Ink Cartridge
Replace ink cartridges that are low on ink or empty.
Make sure ink cartridges are snapped into place and are properly installed in their appropriate slot.
Double check to make sure that you've removed the tape over the vent if you installed a new cartridge.
Regards,
Will
Not finding what you are looking for?
