EPoX Computers & Internet - Recent Questions, Troubleshooting & Support

go to tigerdirect.com

http://www.computerhope.com/comp/epox.htmread it carefuly.http://www.innovative-sol.com/drivermax/here are a good driverprogram.freeware do a scan.

From http://www.motherboard.cz/mb/epox/EP-4PDA5.htm: 4 DDR modules for DDR 333/400 dual channel architecture If you have 4 ram slots and only 2 are filled, you just need to match the speed of the two you currently have, they can be any size(500mb, 1gb, etc). I'm not sure you'll be able to find DDR ram anymore though.. and NO you cannot use DDR2 ram.

Mo bo has nada to do with reading, writing, disks. That is the domain of the floppy drive and/or optical unit. You replace the latter drives.

How is your Chinese? The old employees of Epox are in China. http://www.supox.cn/pr_old.php?lm1=1 https://en.wikipedia.org/wiki/EPoX They do support the Epox boards however.

Motherboard specs show it has integrated audio. Try removing the audio card and connecting sound to the MB audio. Powersave is OS related not hardware. Look at user settings.

There are many beep codes listed here:
http://www.computerhope.com/beep.htm
What is "FF"?
Obviously, this sounds like a video problem. Is this a new build? Any previous problems?
Is there a video card?

FF mean kind for computer geeks Fatal Failure meaning the only solution is geting a new one thanks and good luck

check the cable make sure the hd is getting power try another sata connection by swapping the cable from dvd device make sure you set the drive select some drives require it do not use cable select make sure the battery back up has 3 volts you could try shorting out the bios to reset the motherboard - there should be a jumper on the board, turn power off, the jumper or connect the two pin so the short out, than turn on machine, just for few seconds and turn off, remove the jumper. xxxxxxxxxxxxxxxxxx important xxxxxxxxxxxxxxxxxx before or when booting the system push F10 to access bois setup all devices, dvd, video card, if that dont work you can try F1 or F2 when you start the system when you exit the bios make sure to save it i think F10 save and reboot. so save new changes and device ID.

http://www.motherboard.cz/mb/epox/EP-9NDA3+.htm HERE. 184 PINS.

http://www.motherboards.org/mobot/motherboards_d/Epox/EP-4PDA5%252B/ HERE.

seems like you won't be able to obtain drivers for this m/b from the manufacturer http://en.wikipedia.org/wiki/EPoX However there appear lots of places who can provide drivers - search the internet for "Epox ep 8npa7i" and take your pick - I don't know how good/reliable any of the purveyors are, nor can I recommend a source for drivers that work. 26.December.2014

http://www.newegg.com/Product/Product.aspx?Item=N82E16813123254