Emerson Car Audio & Video - Popular Questions, Answers, Tips & Manuals
I tried to install my emerson dvd player and the
It is now confirmed that your emerson is faulty. Please remove the connection open the set if there is no breach of warrranty- if new- and look inside. try and tighten all the connector points, the joints, the flat cords. check the leadds to the front panel and check for any breaks. Assuming this was working earlier and has failed now, then you will need to check on the display/ processor for failure. If aftera ll this check the light are staying on then you have a possible failure of the micro processor. confirm with a signal check, frequency oscillation and if not present replace. Helpful? Good day
68 views | 1 helpful votes
My son took off the door that covers the dvd
the best solution is to call the company and see if they can send a new one or you try to take the cover off and find the safety switch and krazy glue it down so it will operate be advised that any jaring or moving may make the disk skip. thank you for your question
53 views | 0 helpful votes
Are these speakers any good?
These would make great secondary subs if your going for an elaborate install, but in the end even cheap no name subs will sound good if coupled to a good amp. The best way to know is to test them, push on the cone and feel it's resistence, if it feels tight, they should pound, if not, be careful.
58 views | 0 helpful votes
Tearing at top of MT-1564R screen
There is a possibility that you have a weak video signal. You can boost this with a small video amplifier. This is most commonly seen in set-ups that have multiple monitors or when you have long video cable runs like you would see in an RV back-up camera system.
95 views | 0 helpful votes
1 CHECK FOR VIDEO INPUT CABLE
2 CHECK BRIGTNESS,CONTRAST CONTROL FOR OPEN
3 IF IT IS CONNECTED WITH DVD CHECK FOR LEADS CONECTION
REST NEXT TIME THANKS
260 views | 0 helpful votes
Not finding what you are looking for?