Emerson Car Audio & Video - Page 9 - Recent Questions, Troubleshooting & Support

To unlock the radio, enter the four-digit
security code found on the removable

If the code is entered incorrectly, you
can try 2 more times. After 3 incorrect
entries, the radio will display “LOCK.”
You must turn the radio off, while leaving
the ignition and battery on, for 1
continuous hour before attempting to
unlock the radio again.

Car Audio &... | Answered on Dec 23, 2019

code is 2351

Car Audio &... | Answered on Dec 23, 2019

I own a 2009 DODGE JOURNEY with a 6 DISC CHANGER - HARD DISC DRIVE (which is also a panel holding the Bluetooth, GPS, Time, Set-up, and Radio controls) that STOPPED READING DISCS two months ago. I have taken immaculate care of every aspect of this vehicle.

The problem is not dirty, scratched, or damaged DISCS.
The problem is not DISCS jammed in there.
I have long-since emptied it.

The problem is it won't read the DISCS.

Any suggestions? I'm looking for a used assembly/unit of the same thing to replace it with. But, I'd rather just have it fixed or just work. Everything else works fine. Just not the DISC player in any way whatsoever.

Any suggestions, links, etcetera would be much appreciated.

Thank you! : )

Car Audio &... | Answered on Dec 20, 2019

if any of u guys want s to sell the unit let me know [email protected]

Car Audio &... | Answered on Dec 17, 2019

Hold the track button to the right for 10 sec. and it will auto enter it self, get the code. Then go to the ID code menu and enter a new one.

Good luck and let me know!!

Car Audio &... | Answered on Dec 08, 2019

At the back of the car in the boot there is a Cover on the side. Take that off and you will see a wire's There will be a white Connector that is this is the Aux port and AV port. I made RCA connections on them and works fine. Can not do video when driving which is a pain. email if you want info as i have it on a Word Doc, I have the same car.

Car Audio &... | Answered on Dec 02, 2019

The most common issue I had is ground wires, I would also suggest changing it as quickly as possible. The other problem I had is adjusting a GPS navigator for my motorcycle. For this I would recommend checking this page https://yourmotobro.com/best-motorcycle-gps/ because some models require more than just adjusting a pair of screws on handlebars.

Car Audio &... | Answered on Nov 28, 2019

Neither can we. Can you please give us more detail about what it is that you received, and in what context?\

Car Audio &... | Answered on Nov 27, 2019

Good question. Can you tell us in more detail what you are asking about? The device, make and model, and what you are trying to do?

Otherwise there are dozens of different meanings of PSM


Car Audio &... | Answered on Nov 27, 2019

There is a reset button on face or behind detachable that requires a pin point to press 90% of the time this is a fix

Car Audio &... | Answered on Nov 22, 2019

My car (2005 Honda CRV) was shipped overseas and the radio asked for a code. After several tries, I searched the internet for a solution. Apparently Honda now allows you to obtain the code through their provided website. You will need the VIN #, the phone number and zip code that is on file when you purchased the car. Our car was purchased used and did not come with a manual. When I went to enter the code in I had already entered too many tries, now it reads ERROR E.

However, even before having the code (as well as now that it reads ERROR E) I can get the radio working. Push in preset buttons 1 and 6 and push in the power button simultaneously. A long number appears - at that point I pushed preset button 2 and the radio operated normally. Unfortunately, I do need to do this each time I turn the radio on.

Car Audio &... | Answered on Nov 22, 2019

If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Unlock procedure, override the password lock and to set the device region free procedure of many popular brand TVs and other devices are given

Car Audio &... | Answered on Nov 17, 2019

The Q factor does have to do with tones and pitches of your music. This determines a Quality factor of how pitches are placed (high tones, low tones, and mid tones) and using the Q factor will use a preset setting to put the tones at a high proformance audio.

Simple test and trick for you.

  1. Put in your favorite cd.
  2. Turn on the Q factor
  3. Play a song and listen to it for atleast 45 seconds
  4. turn off the Q factot
  5. Play that same song for atleast 45 seconds
  6. Now you determine if the quality used by the Q factor is better or worse

For some songs that have close pitch audio, it may not be as noticeable, so you can repeat and test. Give it a try, because then you can understand it more by hearing then reading. Its all about how you want it to sound. Good luck

Thank You

Car Audio &... | Answered on Nov 14, 2019

Not finding what you are looking for?
Emerson Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76466 Answers

Are you an Emerson Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides