Electrolux... | Answered 24 hours ago
Electrolux... | Answered on Oct 13, 2018
Electrolux... | Answered on Jul 12, 2018
Electrolux 15... | Answered on Feb 26, 2018
Electrolux... | Answered on Dec 17, 2017
Electrolux... | Answered on Dec 16, 2017
Electrolux... | Answered on Aug 11, 2016
Electrolux ICON... | Answered on Jul 12, 2016
Electrolux... | Answered on Jun 09, 2016
Hello Wally, thanks for your post!
Based off the information you have provided you would like to know the location of the water line inside of your Frigidaire refrigerator. The water line is located within the wall of your refrigerator it is not accessible. The best way to clear out a frozen water line is to disconnect power from the refrigerator for at least two to three hours. This will help defrost any ice build-up within the refrigerator. I hope this information is helpful to you. -Matt
Electrolux... | Answered on Dec 07, 2015
Electrolux "15""... | Answered on Jul 17, 2015
Electrolux... | Answered on Mar 23, 2015
Thank you for your post friend.
I understand that you are having intermittent defrost issues with your Frigidaire refrigerator. Are you experiencing an accumulation of ice buildup, are you losing food? Defrost issues can be caused by a variety of things such as a defective defrost heater, thermostat or defective door gasket. I recommend that you visually inspect the door gasket for defects such as gaps or tears. You can also use a dollar bill to test the door gasket. Place a dollar bill in between the door and the body of the freezer. If the dollar bill pulls out with no to little resistance, you may need to replace the door gasket. A faulty door gasket can allow warm air to enter the compartment and cause frost to buildup.
If there is a miscommunication within your freezer, a reset can possibly correct this issue. I recommend that you reset your refrigerator by unplugging it for 10 minutes. I hope this information has been helpful. -NS
Electrolux... | Answered on Mar 06, 2015
Electrolux... | Answered on Feb 26, 2015
155 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: