Electrolux Dishwashers - Popular Questions, Answers, Tips & Manuals

See page 28 Solution to Common Problems in user manual for help User manual Electrolux ELFW4222AW (English - 32 pages)

The pressure switch in a dishwasher, like the Electrolux ESL6201LO, is a component that helps regulate water levels and prevent overfilling. It's an important part of the dishwasher's water management system. However, I must clarify that specific part numbers, designs, and configurations can vary by model and production date. If you're looking for parts or information about the pressure switch for your dishwasher, I recommend the following steps: 1. **Consult the User Manual:** Check the user manual or documentation that came with your Electrolux dishwasher. The manual might provide information about parts, part numbers, and troubleshooting for your specific model. 2. **Electrolux Customer Support:** Reach out to Electrolux's customer support or service center. They can provide you with accurate information about the pressure switch and help you find the correct replacement part if needed. 3. **Online Appliance Parts Retailers:** Websites that specialize in appliance parts, such as RepairClinic, AppliancePartsPros, and eReplacementParts, often provide diagrams, parts lists, and compatible replacement parts for various appliances, including dishwashers. Search using your model number to find the pressure switch or related parts. 4. **Local Appliance Repair Shops:** Local appliance repair shops often have access to a variety of appliance parts, including pressure switches. They might also be able to assist you in identifying the correct part. 5. **Electrolux Authorized Service Centers:** Contact authorized service centers for Electrolux appliances. They should have access to genuine replacement parts and can provide professional assistance. When searching for parts, always make sure you have the correct model number and, if possible, the part number of the specific component you need. This information will help ensure that you get the right part for your dishwasher model.

Error code C13 on an Electrolux dishwasher model EHT8ILG8 indicates a problem with the water supply to the dishwasher. The code specifically refers to a problem with the water pressure, which could be caused by a clogged water inlet filter, a malfunctioning water inlet valve, or a problem with the water supply hose. To troubleshoot this issue, first check the water supply hose to ensure that it is not kinked or clogged. Then, clean the water inlet filter and make sure that the water supply to the dishwasher is not restricted in any way. If the problem persists, it may be necessary to call a professional technician to diagnose and repair the dishwasher. Please keep in mind that this is based on general information, the error code meaning may vary depending on the model and brand. It's recommended to check the dishwasher manual or contact the manufacturer's customer service for more specific information.

i think that is engaged via a _(i can't think of the word.. it's a points set that works off an electro-magnet) if that got stuck then it will keep the pump engaged in the drain mode.. otherwise it's an issue with the settings.

It could be anything. They have a diagnostic brain that creates beeps or codes, but never hear of one that beeps 120 times. You can try power cycling it. Remove mains power for 2 minutes and try again. If that doesn't fix it you will need a service call. If it is the control board, you may consider a new machine is a better option.

Question edited for clarity and full 'make model (what it is)'. Question moved from Cars and Trucks category. It is a commercial unit and should be repaired professionally. Help in the link https://www.google.com/search?q=electrolux+wt55+overheating+solution ..

Yes, the water inlet valve is leaking and letting water in past a faulty seal. The valve just needs replacing with a new one. They are not serviceable. https://www.google.com/search?q=AEG%2C+Electrolux+%2C+Favourit+parts%2C+water+inlet+valve ..

Hi, Please pour soap and/or toothpaste at the bottom of the washer. This should unclog any drains that the dishwasher uses. And you can also remove any debris present at the bottom of the dishwasher as well. Otherwise, you need to schedule a home depot repair appointment please. Thank you.

I would replace the switch assembly.

buy the manual or get it fixed? moved you out of cars

https://medium.com/@MarkRobertshaw/how-to-reset-the-anti-flood-device-on-your-electrolux-dishwasher-76f8997d6dcd https://www.partselect.com/Dishwasher+test-float-switch+repair.htm

No Service Manual online Parts schematic are normally on the images tab, but not even those for 'W' or 'X'. https://www.google.com/search?q=electrolux+esf5201low+parts+diagram

Run a long, hot, bleach wash. A couple of cups of Javex should do it. https://www.google.com/search?q=clean+the+trap+in+Electrolux+Dishwasher+GLD2440REC1 ..

see if voltage to control board when issue happens if yes bad control board if no power bad power board

I would contact Electrolux and ask for one if you are a qualified engineer.

switch off the device and switch on again. ensure the battery for the remote is okay and try again

These dishwashers have a control panel lock feature that allows you to lock the control panel to prevent kids from activating the unit. To toggle lock/unlock mode, open the door, press and hold the AIR DRY button for 4 seconds.

Could be a defective cycle timer

Dishwasher does not / will not start but the power is on Last updated 30/09/2020 08:52 Issue

• Dishwasher does not / will not start but the power is on

Applies to

• integrated dishwasher
• freestanding dishwasher

Resolution 1. Make sure the door is fully closed. Open and close the door again. If there is a click, this indicates that the door was closed properly. 2. Make sure the delay start function is disabled. Consult the user manual for detailed instructions on disabling this mode. 3. Check if the previous cycle is still in progress. If a cycle is still in progress it needs to be cancelled before programming the next cycle. To cancel the cycle, please read the section regarding cancelling cycles in the user manual for the dishwasher. On some models, the panel will show how you reset a cycle. Resetting may vary depending on the model so it is a good idea to check or download the user manual. 4. Check if "Ultra-quiet" or "Night" options are selected: These options involve long pauses in the wash cycle, lasting up to 20 minutes. The cycle may still be running. 5. Check if there are any error messages or alarms: The error message can be a flashing LED, a sequence of beeps or a code shown on the display. Consult your user manual for detailed information on how to resolve the issue. 6. Check for possible power issues:

• Make certain that the appliance is plugged in and switched on.
• Plug another device into the same socket to determine whether there is power.
• If the socket does not work, contact a local electrician to resolve the issue.

7. Check if there are tripped relays or a blown fuse.

• Reset the circuit-breaker / RCD device or replace the fuse.
• You can reset the circuit-breaker by pushing the switch to the "ON" position.

8. The cycle may not start due to the lack of overlap between the lock and the diamond (applies to AirDry dishwashers). To resolve this issue, refer to the article: "Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle" 9. Contact an Authorised Service Centre. If the above suggestions do not resolve the issue, we recommend requesting a visit by a service engineer. Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.