Electro Brand Audio Players & Recorders - Popular Questions, Answers, Tips & Manuals

most likely problem is broken drive belt You will need to remove platter to access the drive to replace belt. copy and paste Flat Drive belt FBM_20.7 for Electro Brand Model 9207 https://www.youtube.com/watch?v=CvHqpXvkzNo

Using a Spirit level check the surface it stands on is level. Some turntables have adjustable feet to help with this. I had a turntable where the arm would repeatedly slide to the middle. Once I levelled it out it worked perfectly.

Vendor on ebay claims to have original manual for similar model. http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=333598072675&category=50595&pm=1&ds=0&t=1591368230033

https://www.lpgear.com/product/ELECT9261.html https://www.lpgear.com/product/ELECTROBR9261.html

Whats the numbers on the transformor. Is it a step up or a step down. 110v or 220v 50hz or 60hz?

Ebay or amazon is the best chance. They have groups of belts that you can order. They might not all fit your application.

Try eBay.

When you move the headphone plug around and the sound cuts in and out that usually means that the terminals in the jack have corrosion on them. You can usually clean the jack with contact cleaner that is sold in home improvement stores. Here's a video showing how to clean the headphone jack on a phone but the process is the same for any device that uses a headphone.

not really repairable none of them are unless the laser itself died byut even then it isn't really repairable the only way would be to find the same type of unit and swap out the good cd player with the bad one but rather than go thru that just buy a new or nice used one no sense rebuilding this junk they really were throw away units it breaks/ you trow it out simple easist cheapest way out...buy another one used and be happy

Electro Brand USA use the above contact link and ask for what you need-there is no guaranty you will get it. In case the link does not work copy and paste this one: http://electrobrand-usa.com/contact-us

If there is a co in it then it probably fell out and is stuck... especially if it was shaken.... unplug the unit.... remove the screws holding the case together and open it up

unfortunatly the mechanism is jammed up for one reason or the other reason #1 a cd is stuck inside #2 the gear just wore out and or it was forced closed by hand instead of pushing the eject/load button..you can try to gently pry this door open while pressing open/eject button that works 40% of the time..if it does not work? it can then be deemed broken out of order. it's worth a shot trying to pry it open but beware this could either work or really destroy the door/mech/player comes down to this "do you feel lucky" sadly? that's where we're at with this one.

Well, you can plug it into a PC and see if that does the same thing. If so it is defective as in shorting components in it. But what do you expect from items that are made in China. You are better off with a restored regular deck and then plugging audio into your computer. You will get much better results that way. All USB decks are junk.

there will be a user manual online just put in the brand and model and search for user manual or operating manual..you'll find it! I promise!

If the camera wont open, there are 2 basic things to suspect. 1. The software of the camera is corrupt. 2. The camera hardware is faulty What I will advise is that you take the mp3 to a mobile hardware specialist to assist in solving the problem. Or first of all, try a mobile software technician first to reload the software of the mp3 is reloadable

Check that the power from the wall socket its still there. Do you have any lights on the device?

Belts are like big rubber bands. If they wear out and begin to stretch with age, there is no longer enough tension to move the turntable. They may also start and then quit once it warms up and the belt gets warm and expands. See how loose it is once it has been running.

Clean up the potentiometers using the contact cleaning spray

http://www.lpgear.com/product/ELECT9230.html

DId you ever get this figured out? I picked up one of these at a second hand shop with almost no sound from the phonograph but after I changed the needle the sound is great. EXCEPT that it does exactly what you described - have a hard time setting the arm down at the beginning of a 33 album and then it will swipe in about an inch. Fortunately I've been testing with an old scratched up album. Was going to take it apart and see if I could spot a faulty mechanism. Only does it at the very outer edge and feels like there's a motor resisting.