Electric Kitchen Appliances - Others - Page 9 - Recent Questions, Troubleshooting & Support
I have got lincat fryer j10 the pilot won't stay
Hi there.
Make sure that the thermopile is receiving enough heat from the pilot and if it does, check if the hi limit is good, check and tighten also all of the wiring connections, before replacing the gas valve.
Regards.
2/19/2023 3:51:13 PM •
Kitchen...
•
Answered
on Feb 19, 2023
How do you replace the battery on a Taylor 508
1) remove the soft rubbery cover from the back of the thermometer, this will expose a screw which holds the front plate on.
2) remove the newly exposed screw
3) use a knife or screwdriver (in the small slot on the side of the thermometer) to pry the two pieces of plastic case apart. This will expose the battery
4) use a screwdriver to remove the 1 screw holding the battery cover to battery.
5) replace with a CR2032 3V Lithium cell
6) replace screws and covers
2/18/2023 2:00:08 PM •
Kitchen...
•
Answered
on Feb 18, 2023
Convert 238grams of miralax to cups
1/2 cup heaping,or 7 heaping Tbsp...if mixing w Gatorade for a colonoscopy,I did the generous 1/2 cup per bottle of G-ade ,which is actually 28 oz. not 32 oz.
1/22/2023 8:01:13 PM •
Kitchen...
•
Answered
on Jan 22, 2023
What does error code E-1 mean on carbons Commercial waffle maker
Error code E-1 on a Carbon's Commercial waffle maker typically indicates a problem with the temperature sensor. The temperature sensor is responsible for monitoring and controlling the temperature of the waffle plates. If the sensor is not working correctly, it can cause the error code to appear and the waffle maker to stop working.
Here are a few steps you can try to troubleshoot the issue:
- Check the temperature sensor for any debris or buildup that may be blocking it. Clean the sensor with a soft, dry cloth.
- Check the temperature sensor's connector for any damage or debris that may be preventing it from making a proper connection with the waffle maker. Clean the connector with a soft, dry cloth.
- Check the wiring harness for any frayed or damaged wires that may be causing the problem.
- If the above steps did not resolve the issue, it may be necessary to replace the temperature sensor.
1/14/2023 9:57:30 PM •
Kitchen...
•
Answered
on Jan 14, 2023
Galanz bread machine paddle turns slow
- Make sure that the bread maker is properly assembled and that the paddle is securely attached to the drive shaft.
- Check the power supply and make sure that the bread maker is plugged in and receiving power.
- Check the fuse or circuit breaker to make sure that the bread maker is not tripping any electrical circuits.
- Make sure that the motor and controller are properly connected and functioning correctly. You may want to check the wiring and make sure there are no loose or damaged connections.
1/2/2023 10:37:39 PM •
Kitchen...
•
Answered
on Jan 02, 2023
Not finding what you are looking for?