Electrical Supplies - Popular Questions, Answers, Tips & Manuals


When you say breaker, presumably you refer to an RCD?
The residual current device will trip if the amount of current in the hot wire does not equal the amount of current in the neutral or return wire. This means some current is leaking away which means the chainsaws might have developed a potentially dangerous fault or might just be the result of an excess of damp sawdust entering the motor housing through the vents - or damp has entered the tools by other means.

I find a compressed airline useful for keeping power tools internally clean and dry.

Electric... | 86 views | 0 helpful votes


You need to use rated breaker and did you find a fault for why the breaker shorted?

Electric... | 84 views | 0 helpful votes


In the electric windows of - what - ?

Electric... | 93 views | 0 helpful votes


Connecting 12 batteries in series would give slightly more than 61 volts. Considering that under load voltage will drop then it should be ok. Breaker goes between battery and motor on positive wire.

Electric... | 115 views | 0 helpful votes


Hi!

We help people repair their Clarke Generators. You can find testing procedures here: https://www.generatorguru.com/contact-us/

We also hold all the parts possible for all the Clarke Generators and have a "Parts Search Service" if the part is not listed on our site. Check us out on our site.

https://www.generatorguru.com/
Parts Spares for Generators and Small Engine Machinery

image-yvhi3wxpq4zyabcrzo2wizws-5-0_0.jpg

Electric... | 116 views | 0 helpful votes


It cannot be connected to 120 volt ... this is a 12 volt photoeye that integrates into the screw terminals on power pack.
Following link has some basic information for connecting the photoeye
http://waterheatertimer.org/Malibu-power-pack-stopped-working.html#troubleshoot

Electric... | 235 views | 0 helpful votes


either short or failure of gfci

Electric... | 148 views | 0 helpful votes

Tip

Repair broken power cord


I have a 50-ft power cord for my electric pole saw. In an accident, the saw cut the power cord. It's long cable and I want to save it. My method keeps the cable lean and retain it's strength. It's not water-proof, but I never use a pole saw in a rainy day.

on May 31, 2019 | Electrical Supplies


If you make your point of reference the flywheel (starter side) of the motor then rotation is clockwise. If your point of reference is the alternator or the end opposite the motor flywheel, then it will be CCW.

Electric... | 163 views | 1 helpful votes


If you use a car battery you cannot go wrong. Jumper a car battery!

Electric... | 139 views | 0 helpful votes


Go to google put in the item you're looking for and it will be there for you

Electric... | 68 views | 0 helpful votes


There are many ways to start. First, the starter is weak, and the second is that the starter does not move. If the latter, check the controller for signal output. If there is no signal output, check the battery for voltage? If there is pressure, the controller may be broken.

Electric... | 269 views | 0 helpful votes


depends on how many amps you are drawing at any given time??? whats your max draw??

Electric... | 67 views | 0 helpful votes


you would really have to check with the dealer or see if there is a place for one. some come with a starter upgrade and some dont

Electric... | 218 views | 0 helpful votes


;) you wearing rubber boots?? Electricity is supposed to travel down to the ground but if your feet are rubberized then it will not work

Electric... | 53 views | 0 helpful votes

Not finding what you are looking for?
Electric Logo

120 questions posted

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Fahr Quad

Level 3 Expert

774 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

epangan29

Level 2 Expert

113 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...