EGR Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 11 Products
  • 10 Answers
  • 588 Views
0helpful
1answer

Why do I keep getting a burning rubber smell from the rear offside of my 2013 santa fee.16000 miles on clock,will do this about every two weeks or so

check around exhaust pipes make sure nothing is touching it wires ect also jack car up and make sure that the front & rear brakes are not binding on as this could be causing the smell
5/14/2015 4:26:06 PM • 2013 Hyundai... • Answered on May 14, 2015
0helpful
1answer

How do I locate and change the thermostat on 3ltr tdi 2009 ranger

I dont no alot about this car but in my exspearence its normaly where you have been looking,but you could see if its nexst to the water pump,best of luck.(maybe the firmostate was missing to begin with)
12/15/2014 11:35:12 AM • 2009 Ford Ranger... • Answered on Dec 15, 2014
0helpful
1answer
0answers
0helpful
2answers

Replacement part for egr line with california emission

Junk yard part sounds like..
7/2/2014 3:33:26 AM • EGR Office... • Answered on Jul 02, 2014
0helpful
1answer

Door locks 2013 hyundai santa fe suv

short in the drivers side door lock solenoid. replace it
1/30/2014 2:10:56 AM • 2013 Hyundai... • Answered on Jan 30, 2014
0helpful
1answer

I put new EGR valve in 99 Nissan Altima code came

The fault may possibly still exist, but it is unclear whether you cancelled the trouble code after the repair was done. You need to disconnect the EFI main relay, or the battery itself, for 60 sec to erase the old code.
10/24/2013 6:26:06 AM • EGR Office... • Answered on Oct 24, 2013
0helpful
1answer

Egr excessive flow fault P0402 on 2001 Ford escape

Easy fix! I've had the same problem/headache and spent the same on parts. Replace your back-pressure sensor (it's easy to do-about $38-at Autozone or others) They can also show you where it is and how to do it. For a 2001 Taurus- part looks like a black box with 2 vacuum hose nipple holes and an electrical connection. It's definitely not your egr valve (costly!) I Should've asked my fleet service at work first rather than after. This repair consist of undoing 2 little vacuum hoses and an electrical connection clip and replace with new part in reverse order-DONE! Autozone will erase the codes with scan tool and your on your way. Ten thousand miles later and still no issues with mine! Good luck!
9/27/2009 9:06:45 PM • EGR Cycling • Answered on Sep 27, 2009
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top EGR Experts

Anonymous

Level 1 Expert

2 Answers

Thomas Smithbrother

Level 3 Expert

3698 Answers

Paula Hamilton

Level 3 Expert

894 Answers

Are you an EGR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...